GUFB15M Datasheet, PDF (1/2 Pages) Gulf Semiconductor – SINTERED GLASS JUNCTION FAST SWITCHING PLASTIC RECTIFIER VOLTAGE: 1000V CURRENT: 1.5A

GUFB15M
SINTERED GLASS JUNCTION
FAST SWITCHING PLASTIC RECTIFIER
VOLTAGE: 1000V
CURRENT: 1.5A
FEATURE
High temperature metallurgically bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C /10sec/0.375”lead length at 5 lbs tension
Operate at Ta =55°C with no thermal run away
Typical Ir<0.2µA
Low power loss, high efficient
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E,method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
SOD-57
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
SYMBOL
Maximum Recurrent Peak Reverse Voltage
Vrrm
Maximum RMS Voltage
Vrms
Maximum DC blocking Voltage
Maximum Average Forward Rectified Current 3/8”lead
length at Ta =55°C
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Forward Voltage at rated Forward Current
and 25°C
Maximum full load reverse current full cycle average at
55°C Ambient
Maximum DC Reverse Current
at rated DC blocking voltage
Ta =25°C
Ta =125°C
Typical Reverse Recovery Time
(Note 1)
Vdc
If(av)
Ifsm
Vf
Ir(av)
Ir
Trr
Typical Junction Capacitance
(Note 2)
Cj
Typical Thermal Resistance
(Note 3) Rth(ja)
Storage and Operating Temperature Range
Tstg, Tj
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
GUFB15M
1000
700
1000
1.5
50
1.7
100
10
100
75
50
20
-65 to +175
units
V
V
V
A
A
V
µA
µA
nS
pF
°C /W
°C
Rev.A1
www.gulfsemi.com