GSIB4A05 Datasheet, PDF (1/2 Pages) Gulf Semiconductor – SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 to 1000V Current: 4.0A

GSIB4A05 THRU GSIB4A100
SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 50 to 1000V
Current:
4.0A
Features
Glass passivated chip junction
Ideal for printed circuit board
High surge current capability
High case dielectric strength
GSIB-3S
Mechanical Data
Terminal: Plated leads solderable per MIL-STD 202E,
Method 208C
Case: UL-94 Class V-0 recognized Flame Retardant Epoxy
Polarity: Polarity symbol marked on body
Mounting position: any
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward
Rectified output current at
Tc = 100℃(Note 1)
Ta = 25℃(Note 2)
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage drop per
leg at 2.0A
Rating for fusing (t < 8.3ms)
Maximum DC reverse current at
rated DC blocking voltage per leg
Ta = 25°C
Ta = 125°C
Maximum thermal resistance per leg
(Note2)
(Note1)
Symbol
Vrrm
Vrms
Vdc
If(av)
Ifsm
Vf
I²t
Ir
Rth(ja)
Rth(jc)
GSIB4
A05
50
35
50
GSIB4
A10
100
70
100
GSIB4
A20
200
140
200
GSIB4
A40
400
280
400
4.0
2.3
80
1.0
32
5.0
400
26.0
5.0
GSIB4
A60
600
420
600
GSIB4
A80
800
560
800
GSIB4
A100
1000
700
1000
units
V
V
V
A
A
V
A²Sec
µA
℃/W
Operating junction and storage temperature range ^{Tj, Tstg}
-55 to +150
℃
Note:
1. Unit case mounted onAl plate heatsink
2. Unit case mounted on P.C.B. with 0.5 x 0.5” (12 x 12mm) copper peads and 0.375”(9.5mm) lead length
3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw
Rev.A6
www.gulfsemi.com