GSIB2560-E Datasheet, PDF (1/2 Pages) Gulf Semiconductor – SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 600V to 1000V Current: 25.0A

GSIB2560-E THRU GSIB25100-E
SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 600V to 1000V
Current: 25.0A
Features
Glass passivated chip junction
Ideal for printed circuit board
High surge current capability
High case dielectric strength
This series is UL listed under Recognized Component Index,
file number E185029
Halogen Free
GSIB-5S
Mechanical Data
Terminal: Plated leads solderable per MIL-STD 202E,
Method 208C
Case: UL-94 Class V-0 recognized Halogen Free Epoxy
Polarity: Polarity symbol marked on body
Mounting position: any
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
Symbol
GSIB2560-E
GSIB2580-E
GSIB25100-E
units
Maximum repetitive peak reverse voltage
Vrrm
600
Maximum RMS voltage
Vrms
420
Maximum DC blocking voltage
Vdc
600
Maximum average forward
Rectified output current at
Tc = 98℃(Note 1)
Ta = 25℃(Note 2)
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage drop per
leg at 12.5A
Rating for fusing (t < 8.3ms)
If(av)
Ifsm
Vf
I²t
Maximum DC reverse current at
rated DC blocking voltage per leg
Ta = 25°C
Ta = 125°C
Maximum thermal resistance per leg
(Note2)
(Note1)
Ir
Rth(ja)
Rth(jc)
800
1000
V
560
700
V
800
1000
V
25.0
3.5
A
350
A
1.0
V
500
A²Sec
10.0
350
µA
22.0
1.0
℃/W
Operating junction and storage temperature range ^{Tj, Tstg}
-55 to +150
℃
Note:
1. Unit case mounted onAl plate heatsink
2. Unit case mounted on P.C.B. with heatsink
3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw
Rev.A1
www.gulfsemi.com