English
Language : 

GP08A Datasheet, PDF (1/2 Pages) General Semiconductor – GP02
GP08A THRU GP08J
SINTERED GLASS JUNCTION
PLASTIC RECTIFIER
VOLTAGE:50 TO 600V
CURRENT: 0.8A
FEATURE
High temperature metallurgically bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C/10sec/0.375”lead length at 5 lbs tension
Operate at Ta =55°C with no thermal run away
Typical Ir<0.1µA
DO-41\DO-204AL
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL
GP
08A
GP
08B
GP
08D
GP
08G
Maximum Recurrent Peak Reverse Voltage
Vrrm
50
100 200 400
Maximum RMS Voltage
Vrms
35
70
140 280
Maximum DC blocking Voltage
Vdc
50
100 200 400
Maximum Average Forward Rectified
Current 3/8”lead length at Ta =45°C
If(av)
0.8
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Ifsm
25.0
Maximum Instantaneous Forward Voltage at
1.0A
Vf
1.3
Maximum full load reverse current full cycle
Average at 55°C
Ir(av)
30.0
Maximum DC Reverse Current Ta =25°C
at rated DC blocking voltage Ta =125°C
Ir
5.0
50.0
Typical Reverse Recovery Time (Note 1)
Trr
2.0
Typical Junction Capacitance
(Note 2)
Cj
8.0
Typical Thermal Resistance
(Note 3)
R(ja)
55.0
Storage and Operating Junction Temperature Tstg, Tj
-65 to +175
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
GP
08J
Units
600
V
420
V
600
V
A
A
V
µA
µA
µA
µS
pF
°C
/W
°C
Rev.A4
www.gulfsemi.com