G8XB05 Datasheet, PDF (1/2 Pages) Gulf Semiconductor – SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 to 1000V Current: 8.0A

G8XB05 THRU G8XB100
SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 50 to 1000V
Current: 8.0A
Features
Glass passivated chip junction
Ideal for printed circuit board
High surge current capability
High case dielectric strength
GSIB-3S
Mechanical Data
Terminal: Plated leads solderable per MIL-STD 202E,
Method 208C
Case: UL-94 Class V-0 recognized Flame Retardant Epoxy
Polarity: Polarity symbol marked on body
Mounting position: any
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
Symbol
G8XB
05
G8XB G8XB
10
20
G8XB
40
G8XB
60
G8XB
80
G8XB
100
units
Maximum repetitive peak reverse voltage
Vrrm
50
100
200
400
600
800 1000
V
Maximum RMS voltage
Vrms
35
70
140
280
420
560
700
V
Maximum DC blocking voltage
Vdc
50
Maximum average forward Rectified output current
at Tc = 100℃(Note 1)
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage drop per
leg at 4.0A
If(av)
Ifsm
Vf
Rating for fusing (t < 8.3ms)
I²t
Maximum DC reverse current at
rated DC blocking voltage per leg
Ta = 25°C
Ta = 125°C
Maximum thermal resistance per leg
(Note2)
(Note1)
Ir
Rth(ja)
Rth(jc)
100
200
400
600
800 1000
V
8.0
A
150
A
1.0
V
120
A²Sec
10.0
200
µA
22.0
4.2
℃/W
Operating junction and storage temperature range ^{Tj, Tstg}
-55 to +150
℃
Note:
1. Unit case mounted onAl plate heatsink
2. Unit case mounted on P.C.B. with 0.5 x 0.5” (12 x 12mm) copper peads and 0.375”(9.5mm) lead length
3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw
Rev.A1
www.gulfsemi.com