G3SBA05 Datasheet, PDF (1/2 Pages) Gulf Semiconductor – SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 to 1000V Current: 4.0A

G3SBA05 THRU G3BA100
SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 50 to 1000V
Current: 4.0A
Features
Ideal for printed circuit board
Glass passivated chip junction
High surge current capability
This series is UL listed under Recognized Component Index, file
number E185029
GBU
Mechanical Data
Terminal: Plated leads solderable per MIL-STD 202E,
Method 208C
Case: UL-94 Class V-0 recognized Flame Retardant Epoxy
Polarity: Polarity symbol marked on body
Mounting position: Thru hole for #6 screw
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Symbol
Vrrm
Vrms
G3SB
A05
50
35
G3SB
A10
100
70
G3SB
A20
200
140
G3SB
A40
400
280
G3SB
A60
600
420
G3SB
A80
800
560
G3SB
A100
1000
700
units
V
V
Maximum DC blocking voltage
Maximum average forward rectified Tc = 100℃ (Note 1)
output current at
Ta = 25℃ (Note 2)
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage drop per leg at
2.0A
Rating for fusing (t < 8.3ms)
Maximum DC reverse current at
rated DC blocking voltage per leg
Maximum thermal resistance per leg
Ta = 25°C
Ta = 125°C
(Note2)
(Note1)
Vdc
If(av)
Ifsm
Vf
I²t
Ir
Rth(ja)
Rth(jc)
50
100 200 400 600 800 1000
V
4.0
2.3
A
80
A
1.0
V
27
5.0
400
26.0
5.0
A²Sec
µA
℃/W
Operating junction and storage temperature range
Tj, Tstg
-55 to +150
℃
Note:
1. Unit case mounted on Al. Plate heatsink
2. Units mounted on P.C.B. with 0.5 x 0.5" (12 x 12mm) copper pads, 0.375" (9.5mm) lead length
3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw
Rev.A8
www.gulfsemi.com