G10XB05 Datasheet, PDF (1/2 Pages) Gulf Semiconductor – SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 to 1000V Current: 10.0A

G10XB05 THRU G10XB100
SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 50 to 1000V
Current: 10.0A
Features
Glass passivated chip junction
Ideal for printed circuit board
High surge current capability
High case dielectric strength
GSIB-3S
Mechanical Data
Terminal: Plated leads solderable per MIL-STD 202E,
Method 208C
Case: UL-94 Class V-0 recognized Flame Retardant Epoxy
Polarity: Polarity symbol marked on body
Mounting position: any
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
Symbol
G10X
B05
G10X
B10
G10X
B20
G10X
B40
G10X
B60
G10X
B80
G10X
B100
units
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Vrrm
50
100
200
400
600
800 1000
V
Vrms
35
70
140
280
420
560
700
V
Maximum DC blocking voltage
Vdc
50
Maximum average forward
Rectified output current at
Tc = 100℃(Note 1)
Ta = 25℃(Note 2)
Peak forward surge current 10ms single sine-wave
superimposed on rated load
Maximum instantaneous forward voltage drop per
leg at 5.0A
If(av)
Ifsm
Vf
Rating for fusing (t < 10.0ms)
I²t
Maximum DC reverse current at
rated DC blocking voltage per leg
Ta = 25°C
Ta = 125°C
Maximum thermal resistance per leg
(Note2)
(Note1)
Ir
Rth(ja)
Rth(jc)
100
200
400
600
800 1000
V
10.0
2.7
A
120
A
1.1
V
60
A²Sec
10.0
250
µA
26.0
2.3
℃/W
Operating junction and storage temperature range ^{Tj, Tstg}
-55 to +150
℃
Note:
1. junction to case, with heatsink
2. junction to ambient, without heatsink
3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw
Rev.A1
www.gulfsemi.com