FR107S Datasheet, PDF (1/2 Pages) Gulf Semiconductor – FAST SWITCHING PLASTIC RECTIFIER VOLTAGE: 1000V CURRENT:1.0A

FR107S
FAST SWITCHING
PLASTIC RECTIFIER
VOLTAGE: 1000V
CURRENT:1.0A
FEATURE
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed
250°C10sec/0.375”lead length at 5 lbs tension
Fast switching for high efficiency
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
A-405
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
SYMBOL
FR107S
Maximum Recurrent Peak Reverse Voltage
Vrrm
1000
Maximum RMS Voltage
Vrms
700
Maximum DC blocking Voltage
Vdc
1000
Maximum Average Forward Rectified Current
3/8”lead length at Ta =75°C
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load
Maximum Forward Voltage at rated Forward
Current and 25°C
Maximum DC Reverse Current
at rated DC blocking voltage
Ta =25°C
Ta =100°C
Maximum Reverse Recovery Time
(Note 1)
If(av)
Ifsm
Vf
Ir
Trr
1.0
30.0
1.3
5.0
100.0
500
Typical Junction Capacitance
(Note 2)
Cj
15.0
Typical Thermal Resistance
(Note 3) Rth(ja)
50.0
Storage and Operating Junction Temperature
Tstg,Tj
-50 to +150
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted
Rev.A1
units
V
V
V
A
A
V
µA
nS
pF
°C/W
°C
www.gulfsemi.com