FR101G Datasheet, PDF (1/2 Pages) Rectron Semiconductor – FAST RECOVERY GLASS PASSIVATED RECTIFIER (VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere)

FR101G THRU FR107G
FAST RECOVERY
GLASS PASSIVATED RECTIFIER
VOLTAGE:50 TO 1000V
CURRENT:1.0A
FEATURE
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed
Fast switching for high efficiency
Glass passivated junction
DO- 41\DO-204AL
MECHANICAL DATA
Terminal:Plated axial leads solderable per
MIL-STD 202E, method 208C
Case:Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity:color band denotes cathode
Mounting position:any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
SYMBOL FR1 FR1 FR1 FR1 FR1 FR1 FR1 units
01G 02G 03G 04G 05G 06G 07G
Vrrm
50 100 _{200 400 600 800 1000 V}
Vrms 35 70 _{140 280 420 560 700 V}
Vdc
50 100 _{200 400 600 800 1000 V}
Maximum Average Forward Rectified
Current 3/8”lead length at Ta =75°C
If(av)
1.0
A
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Ifsm
30.0
A
Maximum Forward Voltage at rated Forward
Current and 25°C
Maximum DC Reverse Current Ta =25°C
at rated DC blocking voltage Ta =100°C
Maximum Reverse Recovery Time (Note 1)
Typical Junction Capacitance
(Note 2)
Typical Thermal Resistance
(Note 3)
Storage and Operating Junction Temperature
Vf
Ir
Trr
Cj
R(ja)
Tstg,Tj
1.3
5.0
100.0
150
250
15.0
50.0
-50 to +150
V
µA
µA
500
nS
pF
°C/W
°C
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted
Rev.A1
www.gulfsemi.com