FE5B Datasheet, PDF (1/2 Pages) Gulf Semiconductor – SINTERED GLASS JUNCTION SUPERFAST AVALANCHE RECTIFIER VOLTAGE：100V CURRENT: 5.0A

FE5B
SINTERED GLASS JUNCTION
SUPERFAST AVALANCHE RECTIFIER
VOLTAGE：100V
CURRENT: 5.0A
FEATURE
G-4
High temperature metallurgically bonded construction
Glass passivated cavity-free
Super fast recovery time for high efficiency
Low forward voltage, high current capability
Low leakage current
High surge current capability
MECHANICAL DATA
Case: G-4 sintered glass case
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Polarity: color band denotes cathode end
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
SYMBOL
FE5B
Maximum Recurrent Peak Reverse Voltage
V_RRM
100
Maximum RMS Voltage
V_RMS
70
Maximum DC blocking Voltage
V_DC
100
Maximum Average Forward Rectified Current 3/8”lead
length at Tl=55℃
I_FAV
5.0
Peak Forward Surge Current 8.3ms single half sine-
wave superimposed on rated load
I_FSM
135
Maximum Forward Voltage at rated Forward Current
and 25℃
V_F
0.95
Maximum DC Reverse Current at
rated DC blocking voltage
Ta= 25℃
Ta= 100℃
I_R
5.0
50.0
Maximum Reverse Recovery Time
(Note 1)
Trr
35
Typical Junction Capacitance
(Note 2)
Cj
100.0
Typical Thermal Resistance
(Note 3) Rth(ja)
55.0
(Note4) Rth(jl)
20.0
Storage and Operating Junction Temperature
Tstg, Tj
-65 to +175
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 0.375”(9.5mm) lead length and mounted on P.C. B.
4. Thermal Resistance from Junction to Leadt at 0.375”(9.5mm) lead length with both leads attached to heatsinks
units
V
V
V
A
A
V
µA
nS
pF
℃ /W
℃
Rev.A1
RATINGS AND CHARACTERISTIC CURVES FE5B
www.gulfsemi.com