EU1DGR Datasheet, PDF (1/2 Pages) Gulf Semiconductor – SINTERED GLASS JUNCTION FAST SWITCHING PLASTIC RECTIFIER VOLTAGE:200 TO 400V CURRENT: 1.0A

EU1DGR THRU EU1GGR
SINTERED GLASS JUNCTION
FAST SWITCHING PLASTIC RECTIFIER
VOLTAGE:200 TO 400V
CURRENT: 1.0A
FEATURE
High temperature metallurgically bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C /10sec/0.375”lead length at 5 lbs tension
Operate at Ta =55°C with no thermal run away
Typical Ir<0.2µA
Low power loss, high efficient
DO-41\DO-204AL
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
SYMBOL
EU1DGR
EU1GGR
units
Maximum Recurrent Peak Reverse Voltage
Vrrm
200
400
V
Maximum RMS Voltage
Maximum DC blocking Voltage
Vrms
140
Vdc
200
280
V
400
V
Maximum Average Forward Rectified
Current 3/8”lead length at Ta =55°C
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Forward Voltage at rated Forward
Current and 25°C
Maximum full load reverse current full cycle
average at 55°C Ambient
Maximum DC Reverse Current Ta =25°C
at rated DC blocking voltage Ta =150°C
Maximum Reverse Recovery Time (Note 1)
Typical Junction Capacitance
(Note 2)
If(av)
Ifsm
Vf
Ir(av)
Ir
Trr
Cj
1.0
A
30
A
1.1
1.4
V
50
µA
10.0
µA
100.0
µA
50
nS
17
pF
Typical Thermal Resistance
(Note 3)
R(ja)
50
°C
/W
Storage and Operating Temperature Range
Tstg, Tj
-65 to +175
°C
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
Rev.A4
www.gulfsemi.com