ES2A-A Datasheet, PDF (1/2 Pages) Gulf Semiconductor – SURFACE MOUNT FAST ULTRAFAST RECTIFIER VOLTAGE：50 TO 400V CURRENT：2.0A

ES2A-A THRU ES2G-A
SURFACE MOUNT FAST
ULTRAFAST RECTIFIER
VOLTAGE：50 TO 400V
CURRENT：2.0A
FEATURE
Ideal for surface mount pick and place application
Low profile package
Built-in strain relief
High surge capability
High temperature soldering guaranteed
260℃/10sec/at terminals
Glass passivated chip
Ultrafast recovery time for high efficiency
SMA／DO-214AA
MECHANICAL DATA
Terminal：Solder plated, solderable per MIL-STD-750,
Method 2026
Case：JEDEC DO-214AC molded plastic body over
passivated chip
Polarity：color band denotes cathode
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated,
for capacitive load, derate current by 20％)
SYMBOL ES2A-A
Maximum Recurrent Peak Reverse Voltage
Vrrm
50
Maximum RMS Voltage
Vrms
35
Maximum DC blocking Voltage
Vdc
50
Maximum Average Forward Rectified at TL =100℃
Peak Forward Surge Current 8.3ms single half
sine- wave superimposed on rated load
Maximum Instantaneous Forward Voltage at rated
forward current
Maximum DC Reverse Current
at rated DC blocking voltage
Ta =25℃
Ta =100℃
If(av)
Ifsm
Vf
Ir
Maximum Reverse Recovery Time
(Note1 )
Trr
Typical Junction Capacitance
(Note 2)
Cj
Typical Thermal Resistance
(Note 3)
Rth(ja)
Rth(jl)
Storage and Operating Junction Temperature
Tstg, Tj
Note：
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Units mounted on P.C.B. 5.0×5.0mm(0.013mm thick) land areas
ES2B-A
100
70
100
ES2C-A
150
105
150
2.0
50.0
ES2D-A
200
140
200
0.92
10.0
350.0
15
18.0
75.0
20.0
-55 to +150
ES2G-A units
400
V
280
V
400
V
A
A
1.25
V
µA
25
nS
pF
℃ /W
℃
Rev.A1
www.gulfsemi.com