DF005S Datasheet, PDF (1/2 Pages) Won-Top Electronics – 1.0A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER

DF005S THRU DF10S
SINGLE PHASE GLASS
PASSIVATED SURFACE MOUNT BRIDGE
RECTIFIER
VOLTAGE:50 TO 1000V
CURRENT:1.0A
FEATURE
For surface mount application
Reliable low cost construction utilizing molded plastic
Technique
Surge overload rating:50 A peak
DFS
MECHANICAL DATA
Terminal: Plated leads solderable per
MIL-STD 202E, method 208C
Case: UL-94 Class V-0 recognized Flame Retardant Epoxy
Polarity: Polarity symbol marked on body
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
Maximum Recurrent Peak Reverse Voltage
SYMBOL
DF
005S
DF
01S
Vrrm 50 100
Maximum RMS Voltage
Vrms 35 70
Maximum DC blocking Voltage
Vdc
50 100
Maximum Average Forward Rectified
Current at Ta =40°C
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage at
forward current 1.0A
If(av)
Ifsm
Vf
Maximum DC Reverse Current Ta =25°C
Ir
at rated DC blocking voltage
Ta =125°C
Typical Junction Capacitance
Cj
Operating Temperature Range
Tj
Storage and Operating Junction Temperature Tstg
DF DF DF DF
02S 04S 06S 08S
200 400 600 800
140 280 420 560
200 400 600 800
1.0
50.0
1.1
10.0
500.0
25.0
-55 to +125
-55 to +150
DF
10S
1000
700
1000
units
V
V
V
A
A
V
µA
mA
Pf
°C
°C
Note:
1. Measured at 1.0 MHz and applied voltage of 4.0 volt
Rev.4
www.gulfsemi.com