BYG10Y Datasheet, PDF (1/2 Pages) Gulf Semiconductor – SINTERED GLASS JUNCTION SURFACE MOUNTED RECTIFIER VOLTAGE：1600 V CURRENT： 1.5A

BYG10Y
SINTERED GLASS JUNCTION
SURFACE MOUNTED RECTIFIER
VOLTAGE：1600 V
CURRENT： 1.5A
FEATURE
For surface mounted application
High temperature metallurgic ally bonded
Sintered glass junction
Capability of meeting environmental standard of MIL-S-19500
High temperature soldering guaranteed
450℃/10sec/at terminal／complete device
Submersible temperature of 265℃ for 10sec
GF1/ DO-214BA
MECHANICAL DATA
Terminal：Plated Terminal, solderable per
MIL-STD 202, method 208C
Case：Molded with UL-94 class V-0 recognized
Flame Retardant Epoxy over Glass
Polarity：color band denotes cathode end
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single—phase, half —wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated,
for capacitive load, derate current by 20％)
SYMBOL
Maximum Recurrent Peak Reverse Voltage
Vrrm
Maximum RMS Voltage
Vrms
Maximum DC blocking Voltage
Vdc
Maximum Average Forward Rectified Current
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Forward Voltage at rated Forward current
Ta =25℃
Maximum full load reverse current full cycle average
at 75℃ ambient
Maximum DC Reverse Current
at rated DC blocking voltage
Ta =25℃
Ta =125℃
Typical Junction Capacitance
(Note 1)
If(av)
Ifsm
Vf
Ir(av)
Ir
Cj
Typical Thermal Resistance
(Note 2) Rth(ja)
Operating and Storage Temperature Range
Tstg, Tj
Note：
1. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
2. Thermal Resistance from Junction to Ambient 6.0mm² copper pad to each terminal
Rev.A1
BYG10Y
1600
1120
1600
1.5
50.0
1.15
30.0
5.0
50.0
15.0
80.0
-65 to +175
units
V
V
V
A
A
V
µA
µA
pF
℃ /W
℃
www.gulfsemi.com