BY228GP Datasheet, PDF (1/2 Pages) Gulf Semiconductor – SINTERED GLASS JUNCTION PLASTIC RECTIFIER VOLTAGE:1500V CURRENT: 3.0A

BY228GP
SINTERED GLASS JUNCTION
PLASTIC RECTIFIER
VOLTAGE:1500V
CURRENT: 3.0A
FEATURE
High temperature metallurgically bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C /10sec/0.375”lead length at 5 lbs tension
Operate at Ta =55°C with no thermal run away
Typical Ir<0.1µA
DO-201AD
MECHANICAL DATA
Terminal:Plated axial leads solderable per
MIL-STD 202E, method 208C
Case:Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity:color band denotes cathode
Mounting position:any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified
Current 3/8”lead length at Ta =55°C
Peak Forward Surge Current 8.3ms single
Half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage
At 5.0A
Maximum full load reverse current full cycle
Average at 55°C
Maximum DC Reverse Current
at rated DC blocking voltage
Typical Reverse Recovery Time
Ta =25°C
Ta =150°C
(Note 1)
Typical Thermal Resistance
(Note 2)
Storage and Operating Junction Temperature
SYMBOL
Vrrm
Vrms
Vdc
If(av)
Ifsm
Vf
Ir(av)
Ir
Trr
Rth(ja)
Tstg, Tj
BY228GP
1500
1050
1500
3.0
125.0
1.50
100.0
5.0
100.0
1000
70.0
-65 to +175
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Thermal Resistance from Junction to Ambient on PC board with spacing 25mm
units
V
V
V
A
A
V
µA
µA
µA
nS
K /W
°C
Rev.A1
www.gulfsemi.com