1N5554 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – This specification covers the performance requirements for silicon, general purpose,

1N5554
SINTERED GLASS JUNCTION
RECTIFIER
VOLTAGE: 1000V
CURRENT: 3.0A
FEATURE
G-4
High temperature metallurgically bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C /10sec/0.375”lead length at 5 lbs tension
Operate at Ta =55°C with no thermal run away
Typical Ir<0.1µA
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: G-4 sintered glass case
Polarity: color band denotes cathode
Mounting position: any
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL
Maximum Recurrent Peak Reverse Voltage
Vrrm
Maximum RMS Voltage
Vrms
Maximum DC blocking Voltage
Vdc
Maximum Average Forward Rectified Current 3/8”lead
length at Ta =55°C
Peak Forward Surge Current 8.3ms single
Half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage at 9.0A
If(av)
Ifsm
Vf
Maximum Full Load Reverse Current Full Cycle
Average at 55°C
Ir(av)
Maximum DC Reverse Current
at rated DC blocking voltage
Ta =25°C
Ir
Ta =150°C
Typical Reverse Recovery Time
(Note 1)
Trr
Typical Junction Capacitance
(Note 2)
Cj
Typical Thermal Resistance
(Note 3) Rth(ja)
Storage and Operating Junction Temperature
Tstg, Tj
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
1N5554
1000
700
1000
3.0
80.0
1.2
100.0
1.0
100.0
2.0
40.0
20.0
-65 to +175
units
V
V
V
A
A
V
µA
µA
µS
pF
°C /W
°C
Rev.A1
www.gulfsemi.com