1N5400G Datasheet, PDF (1/2 Pages) Rectron Semiconductor – GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER

1N5400G THRU 1N5408G
GLASS PASSIVATED
JUNCTION RECTIFIER
VOLTAGE: 50V to 1000V
CURRENT: 3.0A
FEATURE
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed
250°C /10sec/0.375" lead length at 5 lbs tension
Glass Passivated chip
DO - 201AD
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
Maximum Recurrent Peak Reverse Voltage
1N5 1N5 1N5 1N5 1N5 1N5 1N5 1N5 1N5
Symbol 400 401 402 403 404 405 406 407 408
GGGGGGGG
G
Vrrm _{50 100 200 300 400 500 600 800 1000}
Maximum RMS Voltage
Vrms _{35 70 140 210 280 350 420 560 700}
Maximum DC blocking Voltage
Vdc
50 100 200 300 400 500 600 800 1000
Maximum Average Forward Rectified
Current 3/8" lead length at TL =105°C
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage at
rated forward current
Maximum full load reverse current full cycle at
TL =75°C
Maximum DC Reverse Current
at rated DC blocking voltage
Ta =25°C
Ta =100°C
If(av)
Ifsm
Vf
Ir(av)
Ir
3.0
180
1.1
30.0
5.0
300.0
Typical Junction Capacitance
(Note 1)
Cj
40
Typical Thermal Resistance
(Note 2) Rth(ja)
30
Storage and Operating Junction Temperature
Tstg, Tj
-55 to +150
Note:
1. Measured at 1.0 MHz and applied voltage of 4.0Vdc
2. Thermal Resistance from Junction to Ambient at 0.375" lead length, P.C. Board Mounted
units
V
V
V
A
A
V
µA
µA
pF
°C/W
°C
Rev.A2
www.gulfsemi.com