1N5399-E Datasheet, PDF (1/2 Pages) Gulf Semiconductor – GENERAL PURPOSE PLASTIC RECTIFIER VOLTAGE: 1000V CURRENT: 1.5A

1N5399-E
GENERAL PURPOSE
PLASTIC RECTIFIER
VOLTAGE: 1000V
CURRENT: 1.5A
FEATURE
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed
250°C/10sec/0.375”lead length at 5 lbs tension
Halogen Free
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Halogen
Free Epoxy
Polarity: color band denotes cathode
Mounting position: any
DO-15\DO-204AC
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL
1N5399-E
* Maximum Recurrent Peak Reverse Voltage
Vrrm
1000
* Maximum RMS Voltage
Vrms
700
* Maximum DC blocking Voltage
Vdc
1000
* ^{Maximum Average Forward Rectified}
Current 3/8”lead length at Ta =25°C
* ^{Peak Forward Surge Current 8.3ms single}
Half sine-wave superimposed on rated load
* ^{Maximum Instantaneous Forward Voltage}
at 1.5A
* ^{Maximum full load reverse current full cycle at}
TL =70°C
* ^{Maximum DC Reverse Current Ta =25°C}
at rated DC blocking voltage
Ta =125°C
If(av)
Ifsm
Vf
Ir(av)
Ir
1.5
50.0
1.4
300.0
10.0
200.0
Typical Junction Capacitance
(Note 1)
Cj
15.0
Rth(ja)
50.0
Typical Thermal Resistance
(Note 2)
Rth(jl)
25.0
* Storage and Operation Junction Temperature Tj, Tstg
-50 to +150
Note:
1. Measured at 1.0 MHz and applied voltage of 4.0Vdc
2. Thermal Resistance from Junction to Ambient and from Junction to Lead at 0.375”lead length, P.C. Board Mounted
* JEDEC Registered value
units
V
V
V
A
A
V
µA
µA
pF
°C/W
°C
Rev.A1
www.gulfsemi.com