1N5391 Datasheet, PDF (1/3 Pages) Pan Jit International Inc. – PLASTIC SILICON RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes)

1N5391 THRU 1N5399
GENERAL PURPOSE
PLASTIC RECTIFIER
VOLTAGE: 50 to 1000V
CURRENT: 1.5A
FEATURE
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed
250°C/10sec/0.375”lead length at 5 lbs tension
DO-15\DO-204AC
MECHANICAL DATA
Terminal:Plated axial leads solderable per
MIL-STD 202E, method 208C
Case:Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity:color band denotes cathode
Mounting position:any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60Hz, resistive or inductive load rating at 25°C, unless otherwise stated)
* Maximum Recurrent Peak Reverse Voltage
Symbol
1N5
391
1N5
392
1N5
393
1N5
394
1N5
395
1N5
396
1N5
397
1N5
398
Vrrm _{50 100 200 300 400 500 600 800}
* Maximum RMS Voltage
Vrms _{35 70 140 210 280 350 420 560}
* Maximum DC blocking Voltage
Vdc
50 100 200 300 400 500 600 800
* ^{Maximum Average Forward Rectified}
Current 3/8”lead length at Ta =25°C
* ^{Peak Forward Surge Current 8.3ms single}
Half sine-wave superimposed on rated load
* ^{Maximum Instantaneous Forward Voltage at}
1.5A
* ^{Maximum full load reverse current full cycle}
at TL =70°C
* ^{Maximum DC Reverse Current Ta =25°C}
at rated DC blocking voltage Ta =125°C
Rating for fusing (1ms≤ t < 10ms)
If(av)
Ifsm
Vf
Ir(av)
Ir
I²t
1.5
50.0
1.4
300.0
10.0
200.0
12.5
Typical Junction Capacitance
(Note 1)
Cj
15.0
Rth(ja)
50
Typical Thermal Resistance
(Note 2)
Rth(jc)
13
* Storage and Operation Junction Temperature Tj, Tstg
-50 to +150
Note:
1. Measured at 1.0 MHz and applied voltage of 4.0Vdc
2. Thermal Resistance from junction to ambient and from junction to case at 0.375”lead length, P.C. Board Mounted
* JEDEC Registered value
1N5
399
1000
700
1000
units
V
V
V
A
A
V
µA
µA
A²sec
pF
°C/W
°C
Rev.A7
www.gulfsemi.com