1N4933G Datasheet, PDF (1/2 Pages) Rectron Semiconductor – FAST RECOVERY GLASS PASSIVATED RECTIFIER

1N4933G THRU 1N4937G
GLASS PASSIVATED JUNCTION
FAST SWITCHING PLASTIC RECTIFIER
VOLTAGE:50 TO 600V
CURRENT: 1.0A
FEATURE
High temperature metallurgic ally bonded construction
Glass Passivated cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
250°C/10sec/0.375”lead length at 5 lbs tension
Operate at Ta =75°C with no thermal run away
Typical Ir<0.1µA
DO-41\DO-204AL
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
SYMBOL
1N4933
G
1N4934
G
1N4935
G
1N4936
G
* Maximum Recurrent Peak Reverse Voltage
Vrrm
50
100
200
400
* Maximum RMS Voltage
Vrms
35
70
140
280
* Maximum DC blocking Voltage
Vdc
50
100
200
400
* Maximum Average Forward Rectified
Current 3/8”lead length at Ta =75°C
If(av)
1.0
* Peak Forward Surge Current 8.3ms single
Half sine-wave superimposed on rated load
Ifsm
30.0
* Maximum Forward Voltage at rated Forward
Current and 25°C
Vf
1.2
Maximum DC Reverse Current Ta =25°C
at rated DC blocking voltage Ta =125°C
Ir
5.0
100
* Maximum Reverse Recovery Time (Note 1)
Trr
200.0
Typical Junction Capacitance
(Note 2)
Cj
15.0
Typical Thermal Resistance
(Note 3)
R(ja)
55.0
* Storage and Operating Junction Temperature Tstg, Tj
-55 to +150
Note:
1. Reverse Recovery Condition If =1.0A, Vr =30V
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
* JEDEC registered value
1N4937
G
600
420
600
units
V
V
V
A
A
V
µA
µA
nS
pF
°C /W
°C
Rev.A1
www.gulfsemi.com