1N4007G-1 Datasheet, PDF (1/2 Pages) Gulf Semiconductor – GLASS PASSIVATED JUNCTION RECTIFIER VOLTAGE: 1000V CURRENT: 1.0A

1N4007G-1
GLASS PASSIVATED
JUNCTION RECTIFIER
VOLTAGE: 1000V
CURRENT: 1.0A
FEATURE
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed
250°C /10sec/0.375" lead length at 5 lbs tension
Glass Passivated chip
DO – 41\DO – 204AL
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL
1N4007G-1
Maximum Recurrent Peak Reverse Voltage
Vrrm
1000
Maximum RMS Voltage
Vrms
700
Maximum DC blocking Voltage
Vdc
1000
Maximum Average Forward Rectified
If(av)
1.0
Current 3/8" lead length at Ta =75°C
Peak Forward Surge Current 8.3ms single
Ifsm
30.0
Half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage at
Vf
1.1
rated forward current
Maximum full load reverse current
Ir(av)
30.0
full cycle at T_L =75°C
Maximum DC Reverse Current Ta =25°C
Ir
5.0
at rated DC blocking voltage Ta =100°C
50.0
Reverse Recovery Time Range (Note 1)
Trr
900～1300
Typical Junction Capacitance
(Note 2)
Cj
15.0
Typical Thermal Resistance
(Note 3)
R(ja)
50.0
Storage and Operation Junction Temperature Tstg, Tj
-55 to +150
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 0.375" lead length, P.C. Board Mounted
Rev.A1
units
V
V
V
A
A
V
µA
µA
nS
pF
°C /W
°C
www.gulfsemi.com