1N4007-E Datasheet, PDF (1/2 Pages) Gulf Semiconductor – GENERAL PURPOSE PLASTIC RECTIFIER VOLTAGE: 1000V CURRENT: 1.0A

1N4007-E
GENERAL PURPOSE
PLASTIC RECTIFIER
VOLTAGE: 1000V
CURRENT: 1.0A
FEATURE
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed
250°C/10sec/0.375”lead length at 5 lbs tension
Halogen Free
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Halogen
Free Epoxy
Polarity: color band denotes cathode
Mounting position: any
DO-41\DO-204AL
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL
1N4007-E
* Maximum Recurrent Peak Reverse Voltage
Vrrm
1000
* Maximum RMS Voltage
Vrms
700
* Maximum DC blocking Voltage
Vdc
1000
* ^{Maximum Average Forward Rectified Current} If(av)
1.0
3/8”lead length at Ta =75°C
* ^{Peak Forward Surge Current 8.3ms single Half} Ifsm
30.0
sine-wave superimposed on rated load
* ^{Maximum Instantaneous Forward Voltage at}
Vf
1.1
rated forward current
Maximum full load reverse current
Ir(av)
30.0
full cycle at TL =75°C
Maximum DC Reverse Current
Ta =25°C
Ir
5.0
at rated DC blocking voltage
Ta =100°C
50.0
Typical Junction Capacitance
(Note 1)
Cj
15.0
Typical Thermal Resistance
(Note 2) Rth(ja)
50.0
Storage and Operation Junction Temperature
Tj, Tstg
-50 to +150
Note:
1. Measured at 1.0 MHz and applied voltage of 4.0Vdc
2. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted
* JEDEC Registered value
units
V
V
V
A
A
V
µA
µA
pF
°C /W
°C
Rev.A1
www.gulfsemi.com