1N4001G Datasheet, PDF (1/2 Pages) NXP Semiconductors – Rectifiers(Rugged glass package, using a high temperature alloyed construction)

1N4001G THRU 1N4007G
GLASS PASSIVATED
JUNCTION RECTIFIER
VOLTAGE: 50 TO 1000V
CURRENT: 1.0A
FEATURE
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed
250°C /10sec/0.375" lead length at 5 lbs tension
Glass Passivated chip
DO – 41\DO – 204AL
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified
Current 3/8" lead length at Ta =75°C
Peak Forward Surge Current 8.3ms single
Half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage at
rated forward current
Maximum full load reverse current
full cycle at T_L =75°C
Maximum DC Reverse Current Ta =25°C
at rated DC blocking voltage Ta =100°C
Typical Junction Capacitance
(Note 1)
Operating Temperature
(Note 2)
Storage and Operation Junction Temperature
SYMBOL
Vrrm
Vrms
Vdc
If(av)
1N40
01G
50
35
50
1N40
02G
100
70
100
1N40
03G
200
140
200
1N40
04G
400
280
400
1.0
1N40
05G
600
420
600
1N40
06G
800
560
800
1N40
07G
1000
700
1000
units
V
V
V
A
Ifsm
30.0
A
Vf
1.1
V
Ir(av)
Ir
Cj
R(ja)
Tstg, Tj
30.0
5.0
50.0
15.0
50.0
-55 to +150
µA
µA
µA
pF
°C /W
°C
Note:
1. Measured at 1.0 MHz and applied voltage of 4.0Vdc
2. Thermal Resistance from Junction to Ambient at 0.375" lead length, P.C. Board Mounted
Rev.A1
www.gulfsemi.com