1N4001 Datasheet, PDF (1/3 Pages) Pan Jit International Inc. – PLASTIC SILICON RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)

1N4001 THRU 1N4007
GENERAL PURPOSE
PLASTIC RECTIFIER
VOLTAGE: 50 TO 1000V
CURRENT: 1.0A
FEATURE
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed
250°C/10sec/0.375”lead length at 5 lbs tension
DO-41\DO-204AL
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
* Maximum Recurrent Peak Reverse Voltage
* Maximum RMS Voltage
* Maximum DC blocking Voltage
* ^{Maximum Average Forward Rectified}
Current 3/8”lead length at Ta =75°C
* ^{Peak Forward Surge Current 8.3ms single}
Half sine-wave superimposed on rated load
* ^{Maximum Instantaneous Forward Voltage at}
rated forward current
Maximum full load reverse current
full cycle at TL =75°C
Maximum DC Reverse Current
Ta =25°C
at rated DC blocking voltage
Ta =100°C
Typical Junction Capacitance
(Note 1)
SYMBOL
Vrrm
Vrms
Vdc
If(av)
Ifsm
Vf
Ir(av)
Ir
Cj
1N
4001
50
35
50
1N
4002
100
70
100
1N
4003
200
140
200
1N
4004
400
280
400
1.0
30.0
1.1
30.0
5.0
50.0
15.0
1N
4005
600
420
600
1N
4006
800
560
800
1N
4007
1000
700
1000
units
V
V
V
A
A
V
µA
µA
µA
pF
Typical Thermal Resistance
(Note 2)
R(ja)
50.0
°C/W
Storage and Operation Junction Temperature
Tstg
-50 to +150
°C
Note:
1. Measured at 1.0 MHz and applied voltage of 4.0Vdc
2. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted
* JEDEC Registered value
Rev.A6
www.gulfsemi.com