1G1 Datasheet, PDF (1/2 Pages) GOOD-ARK Electronics – MINIATURE GLASS PASSIVATED JUNCTION RECTIFIER

1G1 THRU 1G7
GLASS PASSIVATED JUNCTION
PLASTIC RECTIFIER
VOLTAGE50 TO 1000V
CURRENT 1.0A
FEATURE
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed
250°C/10sec/0.375”lead length at 5 lbs tension
R-1
MECHANICAL DATA
Terminal Plated axial leads solderable per
MIL-STD 202E, method 208C
Case Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity Color band denotes cathode
Mounting position Any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL 1G1 1G2 _{1G3 1G4 1G5 1G6 1G7 units}
Maximum Recurrent Peak Reverse Voltage
Vrrm
50 100 _{200 400 600 800 1000 V}
Maximum RMS Voltage
Vrms 35 70 _{140 280 420 560 700 V}
Maximum DC blocking Voltage
Vdc
50 100 _{200 400 600 800 1000 V}
Maximum Average Forward Rectified
Current 3/8”lead length at Ta =25°C,
If(av)
1.0
A
Peak Forward Surge Current 8.3ms single
Ifsm
Half sine-wave superimposed on rated load
25.0
A
Maximum Instantaneous Forward Voltage at
Vf
rated forward current
1.1
V
Maximum DC Reverse Current Ta =25°C
Ir
at rated DC blocking voltage Ta =100°C
5.0
µA
50.0
µA
Typical Junction Capacitance
(Note 1)
Cj
15.0
pF
Typical Thermal Resistance
(Note 2) Rth(ja)
50.0
°C/W
Storage and Operation Junction Temperature Tstg
-50 to +150
°C
Note
1. Measured at 1.0 MHz and applied voltage of 4.0Vdc
2. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted
Rev.A5
www.gulfsemi.com