1F1G Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Amperes)

1F1G THRU 1F7G
FAST RECOVERY GLASS PASSIVATED
JUNCTION RECTIFIER
VOLTAGE: 50 TO 1000V
CURRENT: 1.0A
FEATURE
R-1
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed
250°C /10sec/0.375" lead length at 5 lbs tension
Glass Passivated chip
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
Maximum Recurrent Peak Reverse Voltage
SYMBOL 1F
1G
Vrrm
50
Maximum RMS Voltage
Vrms
35
Maximum DC blocking Voltage
Vdc
50
Maximum Average Forward Rectified
Current 3/8" lead length at Ta =50°C
Peak Forward Surge Current 8.3ms single
Half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage at
rated forward current
Maximum full load reverse current
full cycle at T_L =75°C
Maximum DC Reverse Current Ta =25°C
at rated DC blocking voltage Ta =100°C
If(av)
Ifsm
Vf
Ir(av)
Ir
Typical Junction Capacitance
(Note 1)
Cj
Maximum Reverse Recovery Time (Note 2)
Trr
Operating Temperature
(Note 3)
R(ja)
Storage and Operation Junction Temperature Tstg, Tj
1F 1F 1F 1F
2G 3G 4G 5G
100 _{200 400 600}
70 _{140 280 420}
100 _{200 400 600}
1.0
30.0
1.3
30.0
5.0
100.0
15.0
150
250
50.0
-55 to +150
1F 1F units
6G 7G
800 1000 V
560 700
V
800 1000 V
A
A
V
µA
µA
µA
pF
500
nS
°C /W
°C
Note:
1. Measured at 1.0 MHz and applied voltage of 4.0Vdc
2. Test Condition If =0.5A, Ir =1.0A, Irr =0.25A
3. Thermal Resistance from Junction to Ambient at 0.375" lead length, P.C. Board Mounted
Rev.4
www.gulfsemi.com