1A1 Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – MINIATURE PLASTIC SILICON RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)

1A1 THRU 1A7
MINIATURE
PLASTIC RECTIFIER
VOLTAGE50 TO 1000V
CURRENT 1.0A
FEATURE
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed
250°C/10sec/0.375”lead length at 5 lbs tension
R-1
MECHANICAL DATA
TerminalPlated axial leads solderable per
MIL-STD 202E, method 208C
CaseMolded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polaritycolor band denotes cathode
Mounting positionany
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL 1A1 1A2 _{1A3 1A4 1A5 1A6 1A7 units}
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified
Current 3/8”lead length at Ta =25°C,
Peak Forward Surge Current 8.3ms single
Half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage at
rated forward current
Maximum DC Reverse Current Ta =25°C
at rated DC blocking voltage Ta =100°C
Typical Junction Capacitance
(Note 1)
Typical Thermal Resistance
(Note 2)
Vrrm
Vrms
Vdc
If(av)
Ifsm
Vf
Ir
Cj
R(ja)
50 100 _{200 400 600}
35 70 _{140 280 420}
50 100 _{200 400 600}
1.0
25.0
1.1
5.0
50.0
15.0
50.0
Storage and Operation Junction Temperature Tstg
-50 to +150
Note
1. Measured at 1.0 MHz and applied voltage of 4.0Vdc
2. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted
Rev.A4
800 1000 V
560 700 V
800 1000 V
A
A
V
µA
µA
pF
°C/W
°C
www.gulfsemi.com