GT2133 Datasheet, PDF (1/7 Pages) GTM CORPORATION – CMOS POSITIVE VOLTAGE REGULATOR

ISSUED DATE :2006/01/26
REVISED DATE :
GT2133
CMOS Positive Voltage Regulator
Description
The GT2133 series of positive, linear regulators feature low quiescent current (30 A typ.) with low dropout
voltage, making them ideal for battery applications.
The space-saving SOT-26 package is attractive for “Pocket” and “Hand Held” applications.
This rugged device has both Thermal Shutdown, and Current Fold-back to prevent device failure under the
“Worst” of operating conditions.
An additional feature is a “Power Good” detector, which pulls low when the output is out of regulation. In
applications requiring a low noise, regulated supply, place a 1000pF capacitor between Bypass and ground.
The GT2133 is stable with an output capacitance of 2.2 F or greater.
Features
Ô¦Very Low Dropout Voltage
Ô¦Guaranteed 300mA output
Ô¦Over-Temperature Shutdown
Ô¦Current Limiting
Ô¦Short Circuit Current Fold-back
ԦTypical Accurate± 1.5%
Ô¦Noise Reduction Bypass Capacitor
Ô¦Power-saving Shutdown Mode
Ô¦Power Good Detector
Ô¦Factory Pre-set Output Voltages
Ô¦Low Temperature coefficient
Applications
Ô¦Battery Powered Widgets
Ô¦Instrumentation
Ô¦Wireless Devices
Ô¦PC Peripherals
Ô¦Portable Electronics
Ô¦Cordless Phones
Ô¦Electronic Scales
Package Dimensions
Functional Block Diagram
Typical Application Circuit
REF.
A
B
C
D
E
F
Millimeter
Min. Max.
2.70 3.10
2.60 3.00
1.40 1.80
0.30 0.55
0 0.10
0° 10°
REF.
G
H
I
J
K
L
Dimensions
Millimeter
1.90 REF.
1.20 REF.
0.12 REF.
0.37 REF.
0.60 REF.
0.95 REF.
1/7