GP3843 Datasheet, PDF (1/9 Pages) GTM CORPORATION – HIGH PERFORMANCE CURRENT MODE CONTROLERS

CORPORATION ISSUED DATE :2004/04/19
REVISED DATE :2004/09/30B
GP3843
HIGH PERFORMANCE CURRENT MODE CONTROLERS
Description
The GP3843 is specifically designed for Off-Line and dc-to-dc converter applications offering the designer a cost-effective solution with
minimal external components.
The GP3843 has UVLO thresholds 8.5V(on) and 7.6V(off),ideally suited for off-line converters.
Features
*Trimmed Oscillator for Precise Frequency Control
*Oscillator Frequency Guaranteed at 250kHz
*Current Mode Operation to 500kHz
*Automatic Feed Forward Compensation
*latching PWM for Cycle-By-Cycle Current Limiting
*Internally Trimmed Reference with Undervoltage Lockout
*High Current Totem Pole Output
*Undervoltage Lockout with Hysteresis
*Low Startup and Operating Current
Package Dimensions
D
GAUGE PLANE
SEATING PLANE
ZZ
be
b
SECTION Z - Z
DIP-8
REF.
A
A1
A2
b
b1
b2
b3
c
Millimeter
Min.
Max.
-
0.5334
0.381
-
2.921
4.953
0.356
0.559
0.356
0.508
1.143
1.778
0.762
1.143
0.203
0.356
REF.
c1
D
E
E1
e
HE
L
Millimeter
Min. Max.
0.203
0.279
9.017
10.16
6.096
7.112
7.620
8.255
2.540 BSC
-
10.92
2.921
3.810
DIP-8L
Function
Pin1:Compensation
Pin2:Voltage Feedback
Pin3:Current Sense
Pin4:RT/CT
Pin5:Ground
Pin6:Output
Pin7:Vcc
Pin8:Vref
Description
This pin is the Error Amplifier output and is made available for loop
compensation.
This is the inverting input of the Error Amplifier. It’s normally connected to the
Switching power supply output through a resistor divider.
A voltage proportional to inductor current is connected to this input .The
PWM uses this information to terminate the output switch conduction.
The oscillator frequency and maximum output duty cycle are programmed by
connecting resistor RT to Vref and capacitor CT to ground .Operation 500kHz
is possible.
This pin is the combined control circuitry and power ground.
This output directly drives the gate of a power MOSFET. Peak currents up to
1 A are sourced and sunk by this pin.
This pin is the positive supply of the control IC.
This is the reference output .It provides charging current for capacitor CT
through resistor RT.
Absolute Maximum Ratings at Ta = 25к
Parameter
Symbol
VALUE
Unit
Total power Supply and Zener current
(ICC+Iz)
30
mA
Output current, source or sink(note1)
Io
1.0
A
Output energy(capacitive load per cycle)
W
5.0
J
Current sense and voltage feedback inputs
Vin
-0.3 to 5.5
V
1/9