|
GS82583EQ18GK-400 Datasheet, PDF (8/26 Pages) GSI Technology – 8Mb x 36 and 16Mb x 18 organizations available | |||
|
◁ |
GS82583EQ18/36GK-500/450/400
Input Timing
These devices utilize three pairs of positive and negative input clocks, CK & CK and KD[1:0] & KD[1:0], to latch the various
synchronous inputs. Specifically:
ïCK and ïCK latch all address (SA) inputs.
ïCK latches all control (R, W) inputs.
ïKD[1:0] and ïKD[1:0] latch particular write data (D) inputs, as follows:
⢠ïKD0 and ïKD0 latch D[17:0] in x36, and D[8:0] in x18.
⢠ïKD1 and ïKD1 latch D[35:18] in x36, and D[17:9] in x18.
Output Timing
These devices provide two pairs of positive and negative output clocks (aka âecho clocksâ), CQ[1:0] & CQ[1:0], whose timing is
tightly aligned with read data in order to enable reliable source-synchronous data transmission.
These devices utilize a DLL to control output timing. When the DLL is enabled, it generates 0ï° and 180ï° phase clocks from ïCK
that control read data output clock (CQ, CQ), read data (Q), and read data valid (QVLD) output timing, as follows:
⢠ïCK+0ï° generates ïCQ[1:0], ï¯CQ[1:0], Q1 active, and Q2 inactive.
⢠.ïCK+180ï° generates ïCQ[1:0], ï¯CQ[1:0], Q1 inactive, Q2 active, and QVLD active/inactive.
Note: Q1 and Q2 indicate the first and second pieces of read data transferred in any given clock cycle during Read operations.
When the DLL is enabled, ïCQ is aligned to ïCK. See the AC Timing Specifications for more information.
ïCQ[1:0] and ïCQ[1:0] align with particular Q and QVLD outputs, as follows:
⢠ï ïCQ0 and ïCQ0 align with Q[17:0], QVLD0 in x36 devices, and Q[8:0], QVLD0 in x18 devices.
⢠ï ïCQ1 and ïCQ1 align with Q[35:18], QVLD1 in x36 devices, and Q[17:9], QVLD0 in x18 devices.
Rev: 1.06 8/2017
8/26
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2014, GSI Technology
|
▷ |