|
GS81302Q19GE-300 Datasheet, PDF (1/28 Pages) GSI Technology – 144Mb SigmaQuad-II+TM Burst of 2 SRAM | |||
|
GS81302Q07/10/19/37E-318/300/250/200
165-Bump BGA
Commercial Temp
Industrial Temp
144Mb SigmaQuad-II+TM
Burst of 2 SRAM
318 MHzâ200 MHz
1.8 V VDD
1.8 V and 1.5 V I/O
Features
⢠2.0 clock Latency
⢠Simultaneous Read and Write SigmaQuad⢠Interface
⢠JEDEC-standard pinout and package
⢠Dual Double Data Rate interface
⢠Byte Write controls sampled at data-in time
⢠On-Die Termination (ODT) on Data (D), Byte Write (BW),
and Clock (K, K) inputs
⢠Burst of 2 Read and Write
⢠1.8 V +100/â100 mV core power supply
⢠1.5 V or 1.8 V HSTL Interface
⢠Pipelined read operation
⢠Fully coherent read and write pipelines
⢠ZQ pin for programmable output drive strength
⢠Data Valid Pin (QVLD) Support
⢠IEEE 1149.1 JTAG-compliant Boundary Scan
⢠165-bump, 15 mm x 17 mm, 1 mm bump pitch BGA package
⢠RoHS-compliant 165-bump BGA package available
SigmaQuad⢠Family Overview
The GS81302Q07/10/19/37E are built in compliance with the
SigmaQuad-II+ SRAM pinout standard for Separate I/O
synchronous SRAMs. They are 150,994,944-bit (144Mb)
SRAMs. The GS81302Q07/10/19/37E SigmaQuad SRAMs
are just one element in a family of low power, low voltage
HSTL I/O SRAMs designed to operate at the speeds needed to
implement economical high performance networking systems.
Clocking and Addressing Schemes
The GS81302Q07/10/19/37E SigmaQuad-II+ SRAMs are
synchronous devices. They employ two input register clock
inputs, K and K. K and K are independent single-ended clock
inputs, not differential inputs to a single differential clock input
buffer.
Each internal read and write operation in a SigmaQuad-II+ B2
RAM is two times wider than the device I/O bus. An input data
bus de-multiplexer is used to accumulate incoming data before
it is simultaneously written to the memory array. An output
data multiplexer is used to capture the data produced from a
single memory array read and then route it to the appropriate
output drivers as needed. Therefore the address field of a
SigmaQuad-II+ B2 RAM is always one address pin less than
the advertised index depth (e.g., the 16M x 8 has an 8M
addressable index).
Parameter Synopsis
tKHKH
tKHQV
-318
3.145 ns
0.45 ns
-300
3.3 ns
0.45 ns
-250
4.0 ns
0.45 ns
-200
5.0 ns
0.45 ns
Rev: 1.02f 8/2017
1/28
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2010, GSI Technology
|
▷ |