70RCK8 Datasheet, PDF (3/5 Pages) Grayhill, Inc – RACKS 8 Channel

System 50
8 CHANNEL RACK: Miniature
Part No. 70MRCK8
Dimensions are shown in inches
(and millimeters).
All tolerances are ± 0.010 (0,25)
unless otherwise specified.
0.45
(11,4)
0.40
(10,2)
1.40
2.60 ^{(35,6) KEY SLOT}
66,0)
PINS 5/7
PIN 1
6.00 (152,4)
5.20 (132,1)
LOGIC SUPPLY
TERMINAL STRIP
FIELD WIRING
TERMINAL STRIP
+–
0.25 (6,35)
NOTE: MAXIMUM
TERMINAL SCREW
TORQUE NOT TO
EXCEED 5 IN-LBS
3.00 3.50
(76,2) (88,9)
012345 67
5A FUSE
CARD EDGE OR HEADER CONNECTOR
FOR LOGIC SIGNALS (SEE NOTES)
MODULE HOLD DOWN
STRIP WITH THUMB SCREWS
STANDOFF I.D. 0.15 (3,8) DIA.
(4 PLACES) CLEARANCE FOR
#6 SCREW
STATUS LED
0.75
(19,1)
2.20 (55,9)
MAX.
8 CHANNEL RACK: G5
Part No. 70GRCK8
Dimensions are shown in inches
(and millimeters).
All tolerances are ± 0.010 (0,25)
unless otherwise specified.
FUSE
PULLER
.620 (15,75)
HOLES FOR USER
INSTALLED JUMPER
(22 AWG) COPPER
WIRE
PIN 1
50 PIN STRAIGHT
HEADER CONNECTOR
3.40
(86,4)
MAX.
.75
(19,1)
+–
6.00 (152,4)
5.125 (130,18)
LOGIC SUPPLY
TERMINAL STRIP
NOTE: MAXIMUM
TERMINAL
SCREW TORQUE
NOT TO EXCEED
5 IN-LBS.
.250 (6,35)
2.750
(69,85) ^3.250
(82,55)
STATUS LED
ON THE MODULE
STANDOFF I.D.
0.15 (3,8) DIA.
(4 PLACES)
CLEARANCE
FOR #6 SCREW
.093 (2,36) REF.
System 50
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: [phone] • Fax: [phone] • www.grayhill.com
8