30-001-A-01 Datasheet, PDF (2/5 Pages) Grayhill, Inc – Sleek Black Matte Bezel Convenient Snap-In Front Mount

Butt Contact Pushbutton Switches
MOUNTING
Easy Snap-In Mounting
PANEL CUTOUT
Recommended Panel Cut
Switch will fit panels .049" (1,24) to .125" (3,18)
thick. Recommended panel thickness is 18
gauge.
.005 (0,13)
MAXIMUM RADIUS
Just snap into
pre-cut panel hole.
Plastic wings lock
switch in place.
.750"
(19,05)
SQUARE
SPECIFICATIONS
Life Limiting Criteria–Series 30 & 46
Contact Resistance: Less than 25 milliohms
on a new switch
Voltage Breakdown: 1,000 Vac between
mutually insulated parts
Insulation Resistance: 1,000 megohms
minimum
Ratings–Series 30
Current Rating:
30-601 150 mA, 5 Vdc resistive and
20 mA, 20 Vdc resistive
All others 1 A, 115 Vac resistive, or 0.5 A,
220 Vac resistive
Life Expectancy:
30-015
500,000 operations
30-017
200,000 operations
All others 1,000,000 operations
Ratings–Series 46
Current Rating: 250 mA, 115 Vac resistive
or 125 mA, 220 Vac resistive
Life Expectancy: 250,000 operations
Materials and Finishes–Series 30
Bezel: Nylon
Button Cap: ABS plastic
Switch Bushing: Brass, tin zinc
Base: Thermoset plastic
Spring: Tinned music wire
Plunger: Polycarbonate
Shorting Bar:
30-601 Brass, gold-plated over nickel
All Others Brass with fine silver contact area
Base Contacts:
30-601 Brass, gold-plated over nickel
30-002 Brass with fine silver contact area
All Others Bronze with fine silver contact area
Terminals:
30-002 Brass, silver-plated
30-601 Bronze, gold-plated over nickel
All Others Bronze, silver-plated
Nut: Provided only on 30-017; allows button
height adjustment. Brass, zinc trivalent
chromate-plated.
Materials and Finishes–Series 46
Bezel: Nylon
Button Cap: ABS plastic
Switch Bushing: Brass, zinc trivalent
chromate-plated.
Base: Thermoset plastic
Spring: Tinned music wire
Plunger: 46-402/502 Nickel-plated brass
All Others Polycarbonate
Shorting Bar: Phosphor bronze, silver-plated
Base Contacts: Phosphor bronze with silver
contact area
Terminals: Phosphor bronze,tin/silver plating
Covers (46-200/201): Brass, zinc trivalent
chromate-plated
STANDARD OPTIONS
Epoxy-sealed terminals and wire leads, see
page E-35.
LEGENDING OPTION
Contact Grayhill
A button legend can be printed in epoxy ink
which bonds to the surface of the button cap.
Any type style or design which can be
photographed can be used to produce the
legend.
There is a per-button printing charge. A nominal
set up charge per legend applies to orders of 1
to 99 pieces. Non-standard legends are subject
to one time artwork and tooling charges. Consult
Grayhill for help with actual legend.
ORDERING INFORMATION
Use the partial part number you have
selected from the Dimensions and Part
Number chart, and add the button color
suffix. Example:
46-200-A-03
Color: 01, 03, 04,
05, 06, 07
01 = White 03 = Red 04 = Green
05 = Blue 06 = Yellow 07 = Black
Pushbutton
50
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: [phone] • Fax: [phone] • www.grayhill.com