71BDF30-02PAJN Datasheet, PDF (11/14 Pages) Grayhill, Inc – Multi-Deck Rotary Switches

Multi-Deck Rotary Switches
ADJUSTABLE STOPS
Set and Reset Stops to Limit Rotation
Form, Fit, Function Equivalent to Fixed Stop Styles
STICKER
STOP PIN HOLES
STOP PINS
The adjustable stop Series 71 rotary switches allow you to
change the number of positions per pole. Simply remove
and relocate stop pins in the holes in the front of the switch.
The pins are held in place by a self adhesive sticker which
fits over the front plate.
This feature is available in the Series 71 single shaft
standard switches with either ¹/8" or ¹/4" diameter shafts
with either PC or solder lug terminals. It is not available in
military qualified or concentric shaft styles.
All dimensions, ratings and characteristics are the same as
the fixed stop equivalent. The chart shown here describes
the adjustable stop style substitutions for the fixed stop
styles. Although Series 71 is not an exact dimensional
equivalent of the fixed stop styles of Series 8 and 9, it most
nearly represents a functional substitution.
Fixed Stop
Style
08A
09A
71A
71AF
71B
71BF
71E
71EF
Adjustable Stop
Substitution
71AD
71AD
71AD
71ADF
71BD
71BDF
71ED
71EDF
SHAFT AND PANEL SEAL
SHAFT “O” RING
PANEL SEAL
The shaft is sealed by an O-ring inside the bushing. The
panel is sealed by an O-ring at the base of the bushing.
The seals do not alter the dimensions as shown in the
drawings when the switch is mounted.
The panel seal is silicone rubber. The shaft seal is an O-ring
per MIL-P-5516B.
Rotary
12
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: [phone] • Fax: [phone] • www.grayhill.com