97C06SR Datasheet, PDF (1/1 Pages) Grayhill, Inc – Half Pitch DIP Switches

Half Pitch DIP Switches
SERIES 97
Half-Pitch
FEATURES
• Half the Size of Standard DIP
Switches
• Available in 2, 4, 6, 8, and 10
Positions
• Low Profile
• Less Mass for Easy Vacuum Pick
& Place
APPLICATIONS
Used in any DIP application where
space is at a premium such as
notebook computers, hand-held
radios, industrial control products, CD-
ROM drives, cellular base stations
and coin changers.
Fig. 1 Series 97C DIMENSIONS In inches (and millimeters)
Top View
LENGTH
SEE ORDERING
INFORMATION
Front View
.177
(4,50)
Side View
TAPE THICKNESS
.003 (0,08)
.059
(1,50)
.024 (0,61)
.264 (6,71)
.016
(0,41)
.050
(1,27)
Pitch
.004
(0,10)
Unless otherwise specified, tolerances are ±0.008 (0,20)
Recommended PC Pad Dimensions
.050 (1,27) Pitch
.030 (0,76)
.291
.193 _(7,39)
(4,90) _.242
(6,15)
Fig. 2 Series 97R DIMENSIONS In inches (and millimeters)
Top View
A
.047
(1,20)
Front View
.177±.002
(4,50±0,05)
ON
Side View
TAPE
.002
(0,05)
.057
(1,44)
12345 678
.024
(0,6)
.024
(0,6)
.319
(8,1)
.016
(0,40)
Unless otherwise specified, tolerances are ±0.008 (0,20)
.050
(1,27)
PITCH
.004±.004
(0,10±0,10)
Recommended PC Pad Dimensions
.050 (1,27) PITCH
.030
(0,76)
.260
(6,60)
.360
(9,10)
.310
(7,85)
SPECIFICATIONS
Electrical Ratings
Contact Rating: 25 mA at 24 Vdc
switching; 100 mA at 50 Vdc non-switching
Contact Resistance: 100mΩ max, initial
Insulation Resistance: 100 MΩ min at 100
Vdc
Dielectric Strength: 300 Vac 60 sec
Switch Capacitance: 5pF maximum
Contact Arrangement: SPST
Mechanical Ratings
Life: 1,000 cycles minimum
Operation Force: 500 gF
Mechanical Shock: MIL-STD-202F, Method,
213B, Test Condition A. Gravity: 50G's
(peak value), 11 m/sec. Direction and
times: 6 sides and 3 times in each direction.
Vibration: MIL-STD-202F, Method 201A.
Passed 6 hours (2 hours in each) of three
ORDERING INFORMATION
perpendicular planes at a cycle of 10-55-10Hz/
1 minute.
Operating Temperature Range: -40 to 85°C
Storage Temperature Range: -40 to 85°C
Materials
Base and Cover: UL94V-0 Nylon, black
Actuators: UL94V-0 Nylon thermoplastic,
white
Base Contacts: Alloy copper with gold-
plating over nickel
Terminals: Brass with gold-plating
Tape Seal: Kapton
Soldering Information
Vapor phase and IR-reflow soldering can be
applied. With stands 240°C peak
temperature.
All DIP switches are shipped in the "ON"
position.
97C06SR
Series: 97C see fig. 1, 97R see fig. 2
Positions: 02 = .148 (3,76), 04 = .248 (6,30), 06 = .348 (8,84),
08 = .448 (11,38), 10 = .548 (13,92)
Packaging: Blank = Tube, R = Tape and Reel (see pkg note)
Seal: Blank = Unsealed, S = Top Tape Seal
CIRCUITRY
Cleaning: Tape sealed versions are capable
of withstanding spray wash processes using
alcoholic solvents only, water or other
solvents are not recommended. Care
should be taken to avoid flux from the circuit
board adhering to the switch body. The
switch should be allowed to cool for at least
3 minutes between the end of the solder
process and the beginning of the wash
process. The solvent stage of the cleaning
process is not to exceed 1 minute and the
whole wash process is not to exceed 3
minutes. Ultrasonic cleaning is not
recommended.
Packaging Information
Tube: 130 pcs/tube (2 positions), 75 pcs/
tube (4 positions), 54 pcs/tube (6 positions),
40 pcs/tube (8 positions), 33 pcs/tube (10
positions).
Tape and Reel: 97C: 4,000 pcs/reel (all
positions). 97R: 2500 pcs/reel (all positions).
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: [phone] • Fax: [phone] • www.grayhill.com
B-4