95CW06A1T Datasheet, PDF (1/2 Pages) Grayhill, Inc – 6mm Square, Washable

Washable Tactile Switches
SERIES 95C
6mm Square, Washable
Features
• Designed to Allow Submersed Washing
After Soldering
• Excellent Tactile Feedback
• Thru-hole, Gull Wings, Right Angle,
and J-Lead Versions
• Surface Mount Versions Compatible with
SMT Assembly Including Infrared and
Vapor Phase
• Ultraminiature and Lightweight Structure
Suitable for High Density Mounting
Used in applications such as consumer
electronics, audio equipment, PCs, VCRs,
cable boxes, modems, communications
equipment, controls, security and alarm
equipment, and test and measurement
equipment.
applications
DIMENSIONS: Washable Switches In inches (and millimeters)
Thru-hole
Gull Wing
Top View
.244 (6,20)
CL
T1
Front View
.027
(0,70)
CL
.236
(6,00)
Thru-Hole
.248
(6,30) _.071
+0.0-.02
(1,80
+0,0-0,5)
Ø.118 (Ø3,00)
CL
"H" DIM.
See Ordering
Information
.138 ±.020
(3,50 ±0,50)
.157
(4,00)
.311 ±.020
(7,90 ±0,50)
.256 ±.020
(6,50 ±0,50)
Ø.118
(Ø3,00) _CL
T2
Gull Wing
"H" DIM.
See Ordering
Information
T3
T4
0˚
10˚
.004 ±.004
(0,10 ±0,10)
Side View
CL
.256 ±.004
(6,50 ±0,10)
.157 ±.004
(4,00 ±0,10)
4xØ.040 ±.002
(4xØ1,00 ±0,05)
P.C.B. LAYOUT
CL
.267
(6,80)
.433 (11,00)
.102 (2,60)
.212 (5,40)
.228
(5,80)
P.C.B. LAYOUT
J-Lead
F1
T1
Right Angle
T2
F2
CIRCuCItRCDUIaITGRRYaM
SPECIFICATIONS:
Washable Switches
Materials
Base: UL94V-0 Nylon thermoplastic
Cover: Stainless steel,nickel silver
Actuator: Silicone rubber
Terminal: Brass with silver-plating
Contact: Stainless steel with silver-plating
Electrical
Rating: 50mA, 12 Vdc
Life: See table, page C-12
Actuator Travel: .018” ± .008”
Contact Resistance: 100 mΩ max.
J-Lead
0˚
10˚
.276
(7,02)
Ø.118
.028 ^(Ø3,00)
(0,70)
Ø.118 (Ø3,00)
CL
CL
"H" DIM.
See Ordering
Information
.177 (4,50)
.268 (6,80)
0.297 ±0.02
(7,55 ±0,50)
.016
(0,40)
"H" DIM. ±0,008
("H" DIM. ±0,20)
See Ordering
Information
0.157 ±0.02
(4,00 ±0,50)
0.154
(3,90)
.157
(4,00)
.339 (8,60)
.102 (2,60)
.212 (5,40)
P.C.B. LAYOUT
.228 ±0.004
(5,80 ±0,10)
.354 ±0.004 _0.031
(9,00 ±0,10) _(0,80)
.146 (3,70)
0.098
±0.004
(2,50
±0,10)
0.181
(4,61)
.240 (6,10)
0.136 ±0.012
(3,45 ±0,30)
0.197
0.067
(1,70)
.165
(4,20)
±0.004
(5,00
±0,10)
P.C.B. LAYOUT
Unless otherwise specified, tolerances are ±.010 (0,25).
Insulation Resistance: 100 MΩ min. at
500Vdc
Dielectric Strength: No dielectric breakdown
after 250V for one minute
Contact Arrangement: single pole, single
throw
Environmental
Operating Temp. Range: -25 to 70°C
Storage Temp. Range: -30 to 80°C
Mechanical Shock: MIL-STD-202F, Method
213B, Test Condition A. Gravity: 50G’s (peak
value), 11 msec. Direction and times: 6 sides
and 3 times in each direction. High reliability.
Vibration: MIL-STD-202F, Method 201A.
Passed 6 hours (2 hours in each) of three
perpendicular planes at a cycle of 10-55-10Hz/
minute. High reliability.
Soldering Process
Hand Soldering: Use a soldering iron of
30 watts, controlled at 350°C for 5 seconds
maximum while applying solder.
Reflow Soldering (surface mount versions
only): Peak temperature 260°C (500°F).
Wave Soldering: 260C° (500°F) maximum
for 5 seconds subject to PCB .063 in. (1,60
mm) thickness.
TACT
10
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: [phone] • Fax: [phone] • www.grayhill.com