76HPSB02GWRTRT Datasheet, PDF (1/1 Pages) Grayhill, Inc – Compatible with SMT Assembly Including Infrared Reflow and Vapor-Phase

Surface Mount DIP Switches
Series 76HP
Side Actuated PIANO-DIP^®
DIMENSIONS In inches (and millimeters)
FEATURES
• Compatible with SMT Assembly
Including Infrared Reflow and
Vapor-Phase
• Easily Accessed when PC Boards
are Racked
• Reliable Spring and Ball Contact
.305 ± .010
(7,75 ± 0,25)
LeNGtH
± .010 (0,25
See OrDer INFO
.023
.055 ± .010 (5,84)
(1,40 ± 0,25) reF.
.380
± .010
(9,65
± 0,25)
.025 (0,64) r.
.100 ± .005
CL CL (2,54 ± 0,13) tyP.
.012 ± .001
(0,30 ± 0,03)
tyP.
.303 ± .015
(7,70 ± 0,38)
.424 ± .015
(10,77 ± 0,38)
tyP.
Recommended PC Pad Dimensions
.530
(13,46)
tyP.
.280 (7,11)
tyP.
.070 (1,78) tyP.
.100 (2,54) tyP.
CL CL
Circuitry
As viewed from
the top of the
switch in the
positions shown
in the drawing.
Specifications
Electrical Ratings
Make-and-break Current Rating: 2,000
operations per switch position at 1 mA, 5 Vdc;
50 mA, 30 Vdc; or 150 mA, 30 Vdc
Contact Resistance: Initial: 30 mohms
maximum; After Life: 100 mohms maximum
(10 mA at 50 Vdc, open circuit)
Insulation Resistance: Minimum, at 100 Vdc
between adjacent closed contacts and also
across open switch contacts. Initial: 2,000
Mohms
Dielectric Strength: Minimum voltage (AC
RMS) measured between adjacent closed
contacts and also across open switch contacts.
Initial: 750 volts; After Life: 500 volts
Carry Rating: 5 amps, maximum rise of 20°C
Switch Capacitance: 2 pF at 1 megahertz
Mechanical Ratings
Mechanical Life: 2,000 operations per switch
position
Vibration Resistance: Per Method 204, Test
Condition B. 1 mS opening (10 mS allowed)
Mechanical Shock: Per Method 213, Test
Condition A. 1 mS opening (10 mS allowed)
Thermal Shock Resistance: Per specification;
no failures; passes contact resistance
Terminal Strength: Per specification
Thermal Aging: 1,000 hours at 85°C; no
failures
Environmental Ratings
Meets all requirements of MIL- S-83504**. Where
Grayhill performance is superior, the MIL spec
is listed in parentheses.
Operating Temperature Range: -40°C to +
85°C
Storage Temperature Range: -55°C to +
85°C
Moisture Resistance: Per MIL-STD-202,
Method 106
Soldering Information
Solderability: Per MIL-STD-202, Method 208
Tested to EIA Standard RS-448-2.
Resistance to Soldering Heat: Per MIL-S-83504,
six second test
Recommended Processing Temperature:
220°C–230°C (1 pass—260°C maximum)
Processing Position: Switch is to be processed
with all actuators in the closed (on) position as
shipped.
Materials and Finishes
Shorting Member: Brass, gold-plated
over nickel barrier.
Base Contacts: Copper alloy, gold-plated,
over nickel barrier.
Terminals: Copper alloy, matte tin plated over
nickel barrier.
Non-Conductive Parts: Cover is natural color
thermoplastic, actuators are white thermoplastic
(UL94V-O)
Tape Seal: Not available with Tape Seal.
Tape and Reel Packaging
Meets requirements of
EIA 481-2 or EIA 481-3
13 INCH
DIAMeter reeL
CONDUCtIVe
PLAStIC eMBOSSeD
tAPe
DIreCtION
OF FeeD
16mm
16 & 24mm
tAPe
Ordering Information: Tape and Reel Packaging (500 switches per reel)
No. of
Positions*
Length
(inches)
Length
(metric)
Carrier Width
Dim. A
Part
Number
2
0.280"
7,1 mm
24 mm
76HPSB02GWRT
4
0.480"
12,2 mm
24 mm
76HPSB04GWRT
6
0.680"
17,3 mm
32 mm
76HPSB06GWRT
8
0.880"
22,4 mm
44 mm
76HPSB08GWRT
10
1.080"
27,4 mm
44 mm
76HPSB10GWRT
16mm
PIN ONe LOCAtION
COVer tAPe
32, 44 &
56mm
tAPe
* For other lengths, contact Grayhill, Inc.
DIM. A (See OrDer INFO.)
** Note: 100% matte tin terminal plating does not meet MIL-S-83504 for lead content.
Each reel has a 15.750 inch (390 mm)
Available from your local Grayhill Distributor. For prices and discounts, contact a local Sales Office, ^{minimum leader and a 6.30 inch (160 mm)}
an authorized local Distributor or Grayhill.
minimum trailer.
DIP
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: [phone] • Fax: [phone] • www.grayhill.com
8