English
Language : 

60AR18-4-060S Datasheet, PDF (1/2 Pages) Grayhill, Inc – Three-in-One Joystick, Optical Encoder and Pushbutton
Optical Encoders
Series 60AR
Rugged and Sealed Joystick
FEATURES
• Three-in-One Joystick, Optical Encoder and Pushbutton
• Shaft and panel sealed to IP67 against liquids and particulates
• Choices of knobs, cable length and termination
• Customized solutions available
APPLICATIONS
• Aerospace
• Military vehicles and devices
• Mobile electronics for outdoor use
DIMENSIONS in inches (and millimeters)
Unless otherwise specified, standard tolerance are:
Linear ± .025
Diameter ± .010
Angle ± 2.0°
Cable Connector Version
.219±.002
[ 5,56 ±0,05 ]
SHAFT FLAT
Ø.850
[ 21,59]
PANEL SEAL O.D.
Ø.750
[ 19,05]
PANEL SEAL I.D.
Ø1.000
[ 25,4 ]
.460
[ 11,68]
.642±.003
[ 16,31±0,07 ]
.548
[ 13,92]
.600
[ 15,24]
M17x1.0
THREAD
MOUNTING SURFACE
.927 ±.020
[ 23,55 ±0,5 ]
.605 ±.015
[ 15,37 ±0,38 ]
CONNECTOR IS
AMP P/N 215083-8
OR EQUIVALENT
.853 ±.015
[ 21,67 ±0,38 ]
.172
[ 4,36 ]
REF.
JOYSTICK
PIVOT POINT
.455 ±.015
[ 11,56 ±0,38 ]
CABLE LENGTH
±.200
[±5,08]
.025x45°
[0,63]x45°
CHAMFER
Ø.250 ±.002
[ 6,35 ±0,05 ]
.338
[ 8,59 ]
.280
[ 7,11 ]
.046 ±.015
[ 1,17 ±0,38 ]
.250
[ 6,35 ]
.020
[ 0,51 ]
Recommended Panel Cut Out
Ø.679± .003
[ 17,25± 0,07]
.652± .003
[ 16,56± 0,07]
SCALE 2.000
Pin Version
M17x1.0
THREAD
MOUNTING SURFACE
.932 ±.020
[ 23,67 ±0,5 ]
.610 ±.015
[ 15,49 ±0,38 ]
HEADER IS
SAMTEC P/N
ASP-120519-01
(.050" SPACING)
PANEL SEAL GASKET NOT SHOWN TO ILLUSTRATE MOUNTING SURFACE
.025x45°
[0,63]x45°
CHAMFER
.853 ±.015
[ 21,67 ±0,38 ]
.172
[ 4,36 ]
REF.
JOYSTICK
PIVOT POINT
Ø.250 ±.002
[ 6,35 ±0,05 ]
.338
[ 8,59 ]
.280
[ 7,11 ]
.250
[ 6,35 ]
.020
[ 0,51 ]
.940 ±.020
[ 23,88 ±0,5 ]
.046 ±.015
[ 1,17 ±0,38 ]
PANEL SEAL GASKET NOT SHOWN IN LOWER
VIEWS TO ILLUSTRATE MOUNTING SURFACE
Ordering Information
Angle of Throw: 18= 18° or 20 positions, 08= Non-detent or 20 positions, 00= Non-turn
Joystick: 4= Four contacts & four directions; 8= Four contacts & eight directions
60AR18-4-060S
Termination: 0.050" center P= pin header; C= connector; S= stripped cable
Cable Length: 020 thru 250 in 1/2 inch increments, 060= 6.0 inch cable, leave blank if pinned
For prices and custom configurations, contact a local sales office, an authorized distributor, or Grayhill's sales department.
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com