57M22-01-1-16N-F Datasheet, PDF (1/4 Pages) Grayhill, Inc – Smallest Diameter Rotary Switch with this Number of Positions and Current Capacity

Multi-Deck Rotary Switches
SERIES 53, 57 and 59
1.125" Diameter, 1/4 Amp
FEATURES
• Smallest Diameter Rotary Switch
with this Number of Positions and
Current Capacity
• Military Qualified MIL-DTL-3786/36
• Gold-plated Contact System
Compatible with Logic Circuitry
DIMENSIONS In inches (and millimeters)
Military Style
Ser. 53—1.281 (32,54)
Ser. 57 & 59—
1.125 ± .010 (28,58 ± 0,25)
.250 ± .020
(6,35 ± 0,51)
.437
±.020
(11,10
±0,51)
.437
±.020
(11,10
±0,51)
DIM.
A
+
–
.046
.020
(1,17)
(0,51)
DIM. B REF. STUD
PROJECTION
Rear views
CL
1.000 (25.4) SER. 57 & 59
1.156 (29.36) SER. 53
shown with circuit
diagrams
± .010 (0,25)
45°
.219 ± .004 CL
(5.56 ± 0,10)
SEE
CIRCUIT
DIAGRAM
CL OF BUSHING
KEYWAY
CL OF POSITION
NO. 1
.250 + .001
–.002 DIA.
(6,35 + 0,03
–0,05)
BUSHING KEYWAY
.066 ± .002 (1,68 ± 0,05) WIDE
BY .036 ± .003 (0,91 ± 0,08)
DEEP FROM A .375 (9,53) DIA.
MILITARY NUMBERS MARKED HERE
INTEGRAL ASSEMBLY NUT. DO NOT REMOVE.
3/8-32 UNEF-2A THREAD
No. of
Decks
1
2
3
4
5
6
Dimension
A
.916 (23,27)
1.249 (31,72)
1.582 (40,18)
1.915 (48,64)
2.248 (57,10)
2.831 (71,91)
Dimension
B
.032 (0,81)
.032 (0,81)
.032 (0,81)
.032 (0,81)
.032 (0,81)
.281 (7,14)
Approx.
Weight
Grams
50
60
70
80
90
100
No. of
Decks
7
8
9
10
11
12
Dimension
A
3.164 (80,37)
3.497 (88,82)
3.830 (97,28)
4.163 (105,74)
4.496 (114,20)
4.829 (122,66)
Dimension
B
.281 (7,14)
.281 (7,14)
.281 (7,14)
.281 (7,14)
.281 (7,14)
.281 (7,14)
Approx.
Weight
Grams
110
120
130
140
150
160
Mounting Hardware: Two mounting nuts, .094" (2,39) thick by .562" (14,27) across flats, one internal tooth lockwasher
and one non-turn washer (see detail D for dimensions), are supplied with switch.
Grayhill part number and date code marked on detent cover label. Customer part number marked on request. Military
part number marked when required.
Non-Turn Washer Detail D
.375 ± .005
(9,53 ± 0,13)
.125
± .003
(3,18
± 0,08)
STYLE M—.187 (4,75)
STYLE HS—.125 (3,18)
± .010 (0,25)
.032 ± .003
(0,81 ± 0,08)
STANDARD STYLE
MILITARY QUALIFIED
The Series 53, 57 and 59 rotary switches are all
military type switches. Grayhill manufactures
these switches in two styles: M and HS. Style M
is unsealed and is not qualified; Style HS is shaft
and panel sealed and is qualified. The non-
qualified Style M can be regarded as our
Standard Style for types of switches. Although
it is not qualified, Style M is constructed of the
same military grade materials and will provide
comparable performance in all areas. For
example, the Style ‘M’ switches, in addition to
the electrical ratings listed elsewhere in these
pages, will meet the following requirements of
MIL-DTL-3786:
Moisture Resistance: Medium and High Shock;
Vibration (10 to 500 cps); Thermal Shock (-65
°C to 125 °C); Salt Spray; Explosion; Terminal
Strength (pull, 2 lbs. minimum); and Stop
Strength (15 pound-inches minimum).
The line drawings shown above are applicable
to the Style M and Style HS. The only difference
between the two is the length of the tab of the
non-turn washer. The shorter tab for the HS is
explained in the following paragraph.
The Series 53, 57 and 59 Style HS rotary
switches are qualified to MIL-DTL-3786/36. The
Style HS is shaft and panel sealed. The panel is
sealed by an O-ring at the base of the bushing.
The shaft is sealed by an O-ring inside the
bushing. These seals do not alter the dimensions
shown in the line drawings when the switch is
mounted.
A non-turn washer, supplied with the mounting
hardware, may be used with the Style HS
switches. It is suggested that the non-turn washer
be mounted in the following manner to preserve
the seal: from the front of the panel into a hole
that does not go through the panel.
The qualification of the Series 53, 57 and 59
rotary switches does not extend to all possible
combinations listed in the Choices and
Limitations chart. The limitations on the
qualification are described in the chart shown
below.
Standard variations, such as shaft and/or
bushing length, etc., that do not affect switch
performance can also be marked as qualified
product. For complete details contact Grayhill.
Military qualified Series 53, 57 and 59 Style HS
rotary switches may be ordered by the ‘M’
number listed in MIL-DTL-3786/36 or by the
Grayhill part number. Military style switches
will be marked to the specification.
Style HS Switches are MIL-DTL-3786/36
Qualified for the Following Characteristics
Max. No. Max. No.
Max. No.
Series of Decks Poles/Deck Total Poles/Switch
53
5
8
24
57
5
4
20
59
5
5
20
Rotary
32
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: [phone] • Fax: [phone] • www.grayhill.com