GSCB6 Datasheet, PDF (1/3 Pages) Green Power Solutions srl – SCR CONTROL BOARD

Green Power Solutions srl
Via Greto di Cornigliano 6R - 16152 Genova , Italy
Phone: [phone]
Fax: [phone]
Web: www.gpsemi.it
E-mail: [e-mail]
GSCB6
SCR CONTROL BOARD
Full insulation from the power circuit
Insensitive to the input phase sequence
Phase loss inhibit
Soft-start and soft-stop functions
Linear firing delay angle generation
Voltage and current control loops
Optional Aux. boards for communication and firing
External pulse transformers
LINE VOLTAGE UP TO 690V
The board employs an industry-standard fixed-point 16bit DSP controller design and operates either as digital firing gate board
or as stand-alone digital controller board. An auxiliary firing board is available to extend the drive capability up to 12 SCRs.The
gate angle delay generation is fully digital and accepts analog control inputs. The board implements load current control loop
and/or load voltage control loop. It accepts current feedback either from Current Transformer or insulated DC current feedback
(0-5V or 0-10 V). Isolated RS485 and CAN interfaces are also available as optional using an auxiliary communication board.
MAXIMUM RATINGS
Parameter
Description
V_{AC (RMS)}
V_{INS (RMS)}
V_COM
P_SUP
T_A
T_S
Maximum RMS mains voltage
Insulation voltage between mains and control sections
Analog reference command
Power consumption
Operating temperature
Storage temperature
Conditions
Sine waveform T = 1min
At full load
Value
690 V
2500 V
0 to +12 V
25 W
-10 to 55 °C
-65 to 65 °C
ELECTRICAL CHARACTERISTICS
Parameter
Description
PS
Power supply
V_COM
α_D
f_α
T_START
T_STOP
Analog voltage type reference command
Gate delay angle
Gate delay angle command response frequency
Soft start range
Soft stop range
I_GM
Initial hard trigger gate current peak
dI_G/dt
V_GM0
First pulse gate current derivative
First pulse open circuit gate voltage
I_G
Sustaining short circuit gate current
V_G0
Open circuit gate voltage
Conditions
With 1 ohm load
resistance and 3:1 pulse
transformers
With 1 ohm load
resistance and 3:1 pulse
transformers
Value
2x12V_AC 0.6A +
220 V_AC
0 to 5 V
0.5 to 179.5 deg
300 Hz
0.05 to 30 s
0.05 to 30 s
2A
>0.8 A/us
15 V
0.5 A
7V