MUR860F Datasheet, PDF (5/8 Pages) Bruckewell Technology LTD – Super Fast Rectifiers

SUZHOU GOOD-ARK ELECTRONIC CO., LTD
苏州固锝电子股份有限公司
3. Features& Mechanical Characteristics
Features
● Plastic package has underwriters Laboratory
Flammability Classification 94V-0
● Dual rectifier construction，positive center tap
● Metal of silicon rectifier，majority carrier conduction
● Low forward voltage，high efficiency
● Guarding for over voltage protection
● For use in low voltage，high frequency inverters，
● Free wheeling，and polarity protection applications
Mechanical Characteristics
● Case：Epoxy，Molded
● Weight: 1.9grams（approximately）
● Finish：All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
● Lead Temperature for Soldering Purposes：260°C Max.for10 sec
● Shipped 50 units per plastic tube
4. Maximum Ratings and Electrical Characteristics
MAXIMUM RATINGS and ELECTRICAL CHARACTERISTICS(TC=25°C unless otherwise moted)
PARAMETER
TEST CONDITIONS SYMBOL MUR860(F)
UNIT
Maximum repetitive peak reverse voltage
VRRM
600
V
Working peak reverse voltage
VRWM
600
V
Maximum DC blocking voltage
VDC
600
V
Maximum average forward rectified current at
Tc=105°C total device per diode
IF(AV)
A
8
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load per diode
Operating junction temperature range
Isolation voltage (ITO220 only) from terminal to heatsink
t = 1 sec
Storage temperature range
Maximum instantaneous forward voltage per leg
IF=8A
IF=8A
TC=25℃
TC=125℃
IFSM
TJ
VAC
TSTG
VF
125
―55 to+150
1500
―55 to+150
1.55
1.45
A
°C
V
°C
V
Maximum reverse current per leg at working peak
Reverse voltage
Maximum Reverse Recover Time
（If=0.5Amp, IR=1.0Amp,Irec=0.25Amp）
Trr
Thermal Characteristics Ta=25℃ unless otherwise noted
Symbol
Parameter
TJ=25℃
TJ=100°C
RθJC
RθJA
Note：
Thermal Resistance，Junction to Case per Leg
Thermal Resistance，Junction to Ambient per Leg
50
uA
IR
500
uA
Trr
50
ns
Max
（TO220AC）
2.0
62.5
Max
（ITO220AC）
4.0
62.5
Unit
°C /W
°C /W
1. Screw mounting with 4-40 screw，where washer diameteris≤4.9mm(0.19〃)
2. Pulse test:300us pulse width,1% duty cycle
5/8