MUR620 Datasheet, PDF (5/7 Pages) Sangdest Microelectronic (Nanjing) Co., Ltd – ULTRAFAST PLASTIC RECTIFIER

SUZHOU GOOD-ARK ELECTRONIC CO., LTD
්ᇜܥ᫥׈ሰٺܢႵཋ܄ඳ
3. Features& Mechanical Characteristics
Features
● Plastic package has underwriters Laboratory
Flammability Classification 94V-0
● Dual rectifier constructionđpositive center tap
● Metal of silicon rectifierđmajority carrier conduction
● Low forward voltageđhigh efficiency
● Guarding for over voltage protection
● For use in low voltageđhigh frequency invertersđ
● Free wheelingđand polarity protection applications
Mechanical Characteristics
● CaseğEpoxyđMolded
● Weight: 1.9gramsčapproximatelyĎ
● FinishğAll External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
● Lead Temperature for Soldering Purposesğ260°C Max.for10 sec
● Shipped 50 units per plastic tube
4. Maximum Ratings and Electrical Characteristics
MAXIMUM RATINGS and ELECTRICAL CHARACTERISTICS(TC=25°C unless otherwise moted)
PARAMETER
TEST CONDITIONS SYMBOL MUR620(F)
UNIT
Maximum repetitive peak reverse voltage
VRRM
200
V
Working peak reverse voltage
VRWM
200
V
Maximum DC blocking voltage
VDC
200
V
Maximum average forward rectified current at
IF(AV)
A
Tc=100°C total device per diode
6
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load per diode
Operating junction temperature range
Storage temperature range
Maximum instantaneous forward voltage per leg
IF=6A
IF=6A
Maximum reverse current per leg at working peak
Reverse voltage
Maximum Reverse Recover Time
čIf=0.5Amp, IR=1.0Amp,Irec=0.25AmpĎ
Trr
TC=25Â¥
TC=125Â¥
IFSM
TJ
TSTG
VF
TJ=25Â¥
IR
TJ=125°C
Trr
125
A
―65 to+150
°C
―65 to+150
°C
0.93
0.85
V
10
uA
500
uA
35
ns
Thermal Characteristics Ta=25Â¥ unless otherwise noted
Symbol
Parameter
RθJC
RθJA
Noteğ
Thermal ResistanceđJunction to Case per Leg
Thermal ResistanceđJunction to Ambient per Leg
1. Pulse test:300us pulse width,2% duty cycle
Max
čTO220ACĎ
2.0
62.5
Max
čITO220ACĎ
4.0
62.5
Unit
°C /W
°C /W
5/7