MBRH30150CT Datasheet, PDF (5/7 Pages) Surge Components – Schottky Barrier Rectifier

SUZHOU GOOD-ARK ELECTRONIC CO., LTD
苏州固锝电子股份有限公司
3.Features& Mechanical Characteristics Features
● Plastic package has underwriters Laboratory
Flammability Classification 94V-0
● Dual rectifier construction，positive center tap
● Metal of silicon rectifier，majority carrier conduction
● Low forward voltage，high efficiency
● Guarding for over voltage protection
● For use in low voltage，high frequency inverters，
● Free wheeling，and polarity protection applications
Mechanical Characteristics
● Case：Epoxy，Molded
● Weight: 1.9grams（approximately）
● Finish：All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
● Lead Temperature for Soldering Purposes：260°C Max.for10 sec
● Shipped 50 units per plastic tube
4.Maximum Ratings and Electrical Characteristics
MAXIMUM RATINGS and ELECTRICAL CHARACTERISTICS(TC=25°C unless otherwise moted)
PARAMETER
TEST
SYMBOL MBR(F)H30150CT UNIT
CONDITIONS
Maximum repetitive peak reverse voltage
VRRM
150
V
Working peak reverse voltage
VRWM
150
V
Maximum DC blocking voltage
VDC
150
V
Maximum average forward rectified current at
Tc=105°C total device per diode
IF(AV)
15
A
30
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load per diode
Peak repetitive reverse current per leg at tp=2.0us ，1KHz
Voltage rate of change（rated VR）
Operating junction temperature range
Isolation voltage (TO220F only) from terminal to heatsink t =
1 sec
Storage temperature range
Maximum instantaneous forward voltage per leg
IF=15A
IF=15A
TC=25℃
TC=125℃
IFSM
IRRM
DV/dt
TJ
VAC
TSTG
VF
200
1
10000
―55 to+150
1500
―55 to+150
0.85
0.75
A
A
V/us
°C
V
°C
V
Maximum reverse current per leg at working peak
Reverse voltage
Thermal Characteristics Ta=25℃ unless otherwise noted
Symbol
Parameter
TJ=25℃
TJ=100°C
RθJC
RθJA
Note：
Thermal Resistance，Junction to Case per Leg
Thermal Resistance，Junction to Ambient per Leg
IR
500
uA
50
mA
Max
（TO220AB）
2.0
62.5
Max
（TO220AB）
4.0
62.5
Unit
°C /W
°C /W
1. Screw mounting with 4-40 screw，where washer diameteris≤4.9mm(0.19〃)
2. Pulse test:300us pulse width,1% duty cycle
5/7