MURB1020CT Datasheet, PDF (4/7 Pages) International Rectifier – Ultrafast Rectifier

SUZHOU GOOD-ARK ELECTRONIC CO., LTD
苏州固锝电子股份有限公司
3.Features& Mechanical Characteristics
Features
● Plastic package has underwriters Laboratory Flammability Classification 94V-0
● For surface mounted application
● Metal of silicon rectifier，majority carrier conduction
● Low forward voltage，high efficiency
● Guarding for over voltage protection
● For use in low voltage，high frequency inverters，
● Free wheeling，and polarity protection applications
Mechanical Characteristics
● Case：Epoxy，Molded
● Weight: 1.4grams（approximately）
● Finish：All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
● Lead Temperature for Soldering Purposes：260°C Max.for10 sec
● Shipped 50 units per plastic tube or tape reel packing 800/reel
4.Maximum Ratings and Electrical Characteristics
MAXIMUM RATINGS and ELECTRICAL CHARACTERISTICS(TC=25°C unless otherwise moted)
PARAMETER
TEST CONDITIONS SYMBOL MURB1020CT
UNIT
Maximum repetitive peak reverse voltage
VRRM
200
V
Working peak reverse voltage
VRWM
200
V
Maximum DC blocking voltage
VDC
200
V
Maximum average forward rectified current at Per Leg
Tc=105°C total device per diode
Per device
IF(AV)
5
A
10
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load per diode
Operating junction temperature range
Storage temperature range
Maximum instantaneous forward voltage per leg
IF=5A
IF=5A
TC=25℃
TC=125℃
IFSM
TJ
TSTG
VF
90
A
―55 to+150
°C
―55 to+150
°C
0.92
0.83
V
Maximum reverse current per leg at working peak
Reverse voltage
Maximum Reverse Recover Time
（If=0.5Amp, IR=1.0Amp,Irec=0.25Amp）
Trr
TJ=25℃
TJ=100°C
Thermal Characteristics Ta=25℃ unless otherwise noted
Symbol
RθJC
Parameter
Thermal Resistance，Junction to Case per Leg
IR
Trr
Max
2.0
10
uA
500
uA
50
ns
Unit
°C /W
Note：
1. Pulse test:300us pulse width, duty cycle=2%
4/7