English
Language : 

MBRF10100CT Datasheet, PDF (4/6 Pages) KEC(Korea Electronics) – SCHOTTKY BARRIER TYPE DIODE
SUZHOU GOOD-ARK ELECTRONIC CO., LTD
苏州固锝电子股份有限公司
3.Features& Mechanical Characteristics
Features
● Plastic package has underwriters Laboratory
Flammability Classification 94V-0
● Dual rectifier construction,positive center tap
● Metal of silicon rectifier,majority carrier conduction
● Low forward voltage,high efficiency
● Guarding for over voltage protection
● For use in low voltage,high frequency inverters,
● Free wheeling,and polarity protection applications
Mechanical Characteristics
● Case:Epoxy,Molded
● Weight: 1.9grams(approximately)
● Finish:All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
● Lead Temperature for Soldering Purposes:260°C Max.for10 sec
● Shipped 50 units per plastic tube
4.Maximum Ratings and Electrical Characteristics
MAXIMUM RATINGS and ELECTRICAL CHARACTERISTICS(TC=25°C unless otherwise moted)
PARAMETER
TEST CONDITIONS SYMBOL MBRF10100CT UNIT
Maximum repetitive peak reverse voltage
VRRM
100
V
Working peak reverse voltage
VRWM
100
V
Maximum DC blocking voltage
VDC
100
V
Maximum average forward rectified current at
Tc=105°C total device per diode
IF(AV)
10
A
5
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load per diode
Peak repetitive reverse current per leg at tp=2.0us ,1KHz
IFSM
IRRM
125
A
0.5
A
Voltage rate of change(rated VR)
DV/dt
10000
V/us
Operating junction temperature range
TJ
―55 to+150
°C
Storage temperature range
TSTG
―55 to+150
°C
Isolation voltage (TO220F only) from terminal to heatsink
t = 1 sec
VAC
1500
V
Maximum instantaneous forward voltage per leg
IF=5A
IF=5A
TC=25℃
TC=125℃
VF
0.85
0.75
V
Maximum reverse current per leg at working peak
Reverse voltage
TJ=25℃
TJ=100°C
IR
200
uA
6
mA
Thermal Characteristics Ta=25℃ unless otherwise noted
Symbol
RθJC
RθJA
Parameter
Thermal Resistance,Junction to Case per Leg
Thermal Resistance,Junction to Ambient per Leg
Max
4.0
62.5
Unit
°C /W
°C /W
Note:
1. Screw mounting with 4-40 screw,where washer diameteris≤4.9mm(0.19〃)
2. Pulse test:300us pulse width,1% duty cycle
4/6