MBRB1040CT Datasheet, PDF (4/7 Pages) GOOD-ARK Electronics – Product Specification

SUZHOU GOOD-ARK ELECTRONIC CO., LTD
苏州固锝电子股份有限公司
3.Features& Mechanical Characteristics
Features
● Plastic package has underwriters Laboratory Flammability Classification 94V-0
● For surface mounted application
● Metal of silicon rectifier，majority carrier conduction
● Low forward voltage，high efficiency
● Guarding for over voltage protection
● For use in low voltage，high frequency inverters，
● Free wheeling，and polarity protection applications
Mechanical Characteristics
● Case：Epoxy，Molded
● Weight: 1.4grams（approximately）
● Finish：All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
● Lead Temperature for Soldering Purposes：260°C Max.for10 sec
● Shipped 50 units per plastic tube or tape reel packing 800/reel
4.Maximum Ratings and Electrical Characteristics
MAXIMUM RATINGS and ELECTRICAL CHARACTERISTICS(TC=25°C unless otherwise moted)
PARAMETER
TEST CONDITIONS
SYMBOL MBRB1040CT
Maximum repetitive peak reverse voltage
VRRM
40
Working peak reverse voltage
VRWM
40
Maximum DC blocking voltage
VDC
40
Maximum average forward rectified current at
Tc=105°C total device per diode
IF(AV)
10
5.0
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load per diode
IFSM
125
Peak repetitive reverse current per leg at tp=2.0us ，
1KHz
IRRM
0.5
Isolation voltage (TO220F-AB only) from terminal to
heatsink t = 1 min
VAC
1500
Voltage rate of change（rated VR）
DV/dt
10000
Operating junction temperature range
TJ
―55 to +150
Storage temperature range
TSTG
―55 to +150
Maximum instantaneous forward voltage per leg
IF=5.0A
IF=5.0A
Tc=25°C
Tc=125℃
VF
0.70
0.57
Maximum reverse current per leg at working peak
Reverse voltage
Tj=25°C
Tj=100°C
IR
100
10.0
UNIT
V
V
V
A
A
A
V
V/us
°C
°C
V
uA
mA
Thermal Characteristics Ta=25℃ unless otherwise noted
Symbol
RθJC
Parameter
Thermal Resistance，Junction to Case per Leg
Note：
1. Pulse test:300us pulse width, duty cycle=2%
Max
2.0
Unit
°C /W
4/7