MBRB10100CT Datasheet, PDF (4/7 Pages) Micro Commercial Components – 10 Amp Schottky Barrier Rectifier 100 Volts

SUZHOU GOOD-ARK ELECTRONIC CO., LTD
苏州固锝电子股份有限公司
3.Features& Mechanical Characteristics
Features
● Plastic package has underwriters Laboratory Flammability Classification 94V-0
● For surface mounted application
● Metal of silicon rectifier，majority carrier conduction
● Low forward voltage，high efficiency
● Guarding for over voltage protection
● For use in low voltage，high frequency inverters，
● Free wheeling，and polarity protection applications
Mechanical Characteristics
● Case：Epoxy，Molded
● Weight: 1.4grams（approximately）
● Finish：All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
● Lead Temperature for Soldering Purposes：260°C Max.for10 sec
● Shipped 50 units per plastic tube or tape reel packing 800/reel
4.Maximum Ratings and Electrical Characteristics
MAXIMUM RATINGS and ELECTRICAL CHARACTERISTICS(TC=25°C unless otherwise moted)
PARAMETER
TEST CONDITIONS SYMBOL MBRB10100CT
Maximum repetitive peak reverse voltage
VRRM
100
Working peak reverse voltage
VRWM
100
Maximum DC blocking voltage
VDC
100
Maximum average forward rectified current at
Tc=105°C total device per diode
IF(AV)
10
5
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load per diode
Peak repetitive reverse current per leg at tp=2.0us ，1KHz
Voltage rate of change（rated VR）
Operating junction temperature range
Storage temperature range
Maximum instantaneous forward voltage per leg
Maximum reverse current per leg at working peak
Reverse voltage
IF=5A
IF=5A
TC=25℃
TC=125℃
TJ=25℃
TJ=100°C
Thermal Characteristics Ta=25℃ unless otherwise noted
Symbol
RθJC
Parameter
Thermal Resistance，Junction to Case per Leg
Note：
IFSM
IRRM
DV/dt
TJ
TSTG
VF
IR
Max
2.0
125
0.5
10000
―55 to +150
―55 to +150
0.85
0.75
200
6
Unit
°C /W
1. Pulse test:300us pulse width, duty cycle=2%
UNIT
V
V
V
A
A
A
V/us
°C
°C
V
uA
mA
4/7