SGPD520S_15 Datasheet, PDF (1/5 Pages) GOOD-ARK Electronics – Surface Mount Schottky Rectifier Reverse Voltage 20~60V Forward Current 0.5A

SGPD520S thru SGPD560S
Surface Mount Schottky Rectifier
Reverse Voltage 20~60V Forward Current 0.5A
Features
• Low VF Schottky barrier diodes
• Very low profile - typical height of 1.0 mm
• Low forward voltage drop
• Low leakage current
• Moisture sensitivity: level 1, per J-STD-020
• High temperature soldering guaranteed: 260℃/10 seconds
• Halogen-free according to IEC 61249-2-21 definition
Typical Applications
eSGP(SOD‐323F)
For use of fast swiching in RF module, lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
Symbol SGPD520S SGPD540S SGPD560S Unit
VRRM
20
40
60
V
VRMS
14
28
42
V
VDC
20
40
60
V
IF(AV)
0.5
A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
IFSM
15
A
Operating junction and storage temperature range ^TJ,
TSTG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol SGPD520S SGPD540S SGPD560S
Maximum instantaneous
forward voltage
0.5A
V_F
0.45
0.50
0.60
Maximum DC reverse current at TA=25℃
rated DC blocking voltage
TA=125℃
I_R
80
80
30
50
Typical junction capacitance 4.0 V, 1 MHz
C_J
34
25
22
Typical thermal resistance
juntion to mount R_θJM
55
Note:1),The thermal resistance from junction to mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
Unit
Volts
uA
mA
pF
℃/W
www.goodark.com
1/5
2015.04-Rev.A