SGPD220S_15 Datasheet, PDF (1/5 Pages) GOOD-ARK Electronics – Surface Mount Schottky Rectifier Reverse Voltage 20~100V Forward Current 0.2A

SGPD220S thru SGPD2BS
Surface Mount Schottky Rectifier
Reverse Voltage 20~100V Forward Current 0.2A
Features
• Low VF Schottky barrier diodes
• Very low profile - typical height of 1.0 mm
• Low forward voltage drop
• Low leakage current
• Moisture sensitivity: level 1, per J-STD-020
• High temperature soldering guaranteed: 260℃/10 seconds
• Halogen-free according to IEC 61249-2-21 definition
Typical Applications
eSGP(SOD‐323F)
For use of fast swiching in RF module, lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
Symbol SGPD220S SGPD240S SGPD260S SGPD2BS Unit
VRRM
20
40
60
100
V
VRMS
14
28
42
70
V
VDC
20
40
60
100
V
IF(AV)
0.2
A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
IFSM
10
A
Operating junction and storage temperature range ^TJ,
TSTG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol SGPD220S SGPD240S SGPD260S SGPD2BS Unit
Maximum instantaneous
forward voltage
0.2A
V_F
0.45
0.50
0.60
0.80
Maximum DC reverse current at TA=25℃
rated DC blocking voltage
TA=125℃
I_R
80.00
50.00
30
Typical junction capacitance 4.0 V, 1 MHz
C_J
18
13
12
9
Typical thermal resistance
juntion to mount R_θJM
55
Note:1),The thermal resistance from junction to mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
Volts
uA
mA
pF
℃/W
www.goodark.com
1/5
2015.04-Rev.A