SGP1R Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Fast Recovery Rectifier

SGP1R thru SGP7R
Surface Mount Glass Passivated Fast Recovery Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Features
• Low forward voltage drop
• Low leakage current
• Glass passivated Fast Recovery rectifiers
• Low profile - typical height of 1.0 mm
• Moisture sensitivity: level 1, per J-STD-020
• High temperature soldering guaranteed: 260℃/10 seconds
• Halogen-free according to IEC 61249-2-21 definition
Typical Applications
eSGP(SOD‐323F)
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol SGP1R SGP2R SGP3R SGP4R SGP5R SGP6R SGP7R Unit
Maximum repetitive peak reverse voltage VRRM 50
Maximum RMS voltage
VRMS 35
Maximum DC blocking voltage
VDC
50
Maximum average forward rectified current IF(AV)
100 200 400 600 800 1000 V
70
140 280 420 560 700
V
100 200 400 600 800 1000 V
1.0
A
Peak forward surge current 8.3 ms single
half sine-wave superimposed on rated load ^IFSM
25
A
Operating junction and storage temperature TJ,
range
TSTG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol SGP1R SGP2R SGP3R SGP4R SGP5R SGP6R SGP7R Unit
Maximum instantaneous
forward voltage
1A
V_F
1.3
Maximum DC reverse
current
TA=25℃
TA=125℃
I_R
Typical reverse recovery ^IF^=0.5A,IR^=1.0A,
time
I_rr=0.25A
t_rr
Typical junction
capacitance
4.0 V, 1 MHz
C_J
5
250
150
250
5
Typical thermal
resistance¹⁾
juntion to mount R_θJM
60
Note:1),The thermal resistance from junction to mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
Volts
µA
500
nS
pF
℃/W
www.goodark.com
1/4
2015.04-Rev.A